Homepage RENN
ROLLER MILLS
  MANUFACTURER   INDEX  
  PRODUCT   INDEX  
  HOME  
  BACK  
  SECTIONS   -    A     B     C     D     E     F     G     H     I     J      -   SECTIONS  
Request Postal Mail Brochure  CONTACT  US 
Email Questions or Comments

THIS  DATA  DUPLICATED  FROM  THE  RENN MILL  WEB  SITE
•  PTO Mills-Auger Discharge
•  PTO Mills-Conveyor Discharge
•  Electric Mills
•  Auxiliary PTO Mills
•  Blower Mills
     CLICK  ABOVE  FOR  DETAILS

 TOP  OF  PAGE 

Renn PTO Roller Mills - Auger Discharge
  
Features:
•  Heavy Duty PTO - 540 RPM, Shear Bolt Protection
•  Feed Gate Control
•  Magnet
•  2 gpi Flat Rolls
•  Leaf Spring Roll Protection
•  Worm Drive Roll Adjustment
•  Cross Auger Bearng Support
•  Undercarriage, wheels, tires, & jack

RENN
Roller
Mill
Model
Roll
WxD
(in.)
Shaft
Dia.
(in.)
Min
(PTO)
HP
Auger
Dischg
Hyd
Feed
Auger
***
Corn
RMC 12
12x16
1 15/16
25
7" or 8"
6" or 8"
27*
1000**
RMC 24
24x16
1 15/16
60
7", 8" or 10"
6", 8" or 10"
54*
2000**
RMC 30
30x16
2 7/16
80
7", 8" or 10"
8" or 10"
68*
2500**
RMC 36
36x16
2 15/16
90
8", 10" or 12"
8" or 10"
81.6*
3000**
*** Maximum rated capacity
** Bushel/Hour
* Tonne/Hour

Capacity will change with moisture content, roll configuration and particle size desired.


MODEL DESCRIPTION BACKFREIGHT PRICE
Farm Boy, Small Grain
RN9116-410 Model RFB-16 Farmboy PTO Roller Mill - 2 gpi Flat Rolls, Includes undercarriage & 7" x 10' discharge assembly $ $10,080
Small Grains, Chill Cast Rolls
*Note: Specify Groove Pattern: 10, 12, or 15 g.p.i.*
RN9112-415 Model RMC12 PTO Roller Mill - Includes undercarriage & 7" x 12' discharge assembly $ $19,960
RN9124-415 Model RMC24 PTO Roller Mill - Includes undercarriage & 7" x 12' discharge assembly $ $24,570
RN9130-415 Model RMC30 PTO Roller Mill - Includes undercarriage & 8" x 12' discharge assembly $ $30,375
RN9136-415 Model RMC36 PTO Roller Mill - Includes undercarriage & 10" x 12' discharge assembly $ $41,995
RN9148-415 Model RMC48 PTO Roller Mill - Includes undercarriage & 10" x 12' discharge assembly $ $50,835
Large Grains, Chill Cast Rolls
*Note: Specify Groove Pattern: 4, 5, 6, or 8 g.p.i.*
RN9112-420 Model RMC12 PTO Roller Mill - Includes 8" x 12' discharge, 6" x 12' feed auger $ $22,495
RN9124-420 Model RMC24 PTO Roller Mill - Includes 10" x 12' discharge, 8" x 10' feed auger $ $27,870
RN9130-420 Model RMC30 PTO Roller Mill - Includes 10" x 12' discharge, 10" x 10' feed auger, lift & swing $ $35,995
RN9136-420 Model RMC36 PTO Roller Mill - Includes 12" x 12' discharge, 12" x 10' feed auger, lift & swing $ $50,905
Differential Drive, Chill Cast Rolls
*Note: Specify Groove Pattern: 4, 5, 6, 8, 10, 12, or 15 g.p.i.*
RN9112-430 Model RMC12 PTO Roller Mill - Includes 8" x 12' discharge, 6" x 12' feed auger $ $28,175
RN9124-430 Model RMC24 PTO Roller Mill - Includes 10" x 12' discharge, 8" x 10' feed auger $ $37,170
RN9130-430 Model RMC30 PTO Roller Mill - Includes 10" x 12' discharge, 10" x 10' feed auger, lift & swing $ $44,185
RN9136-430 Model RMC36 PTO Roller Mill - Includes 12" x 12' discharge, 12" x 10' feed auger, lift & swing $ $61,495
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - F.O.B. FACTORY
PRICES UPDATED 1/1/14

 TOP  OF  PAGE 

Renn PTO Roller Mills - Conveyor Discharge
Features:
•  Heavy Duty PTO - 540 RPM, Shear Bolt Protection
•  Feed Gate Control
•  Magnet
•  2 gpi Flat Rolls
•  Leaf Spring Roll Protection
•  Worm Drive Roll Adjustment
•  Cross Auger Bearng Support
•  Undercarriage, wheels, tires, & jack

RENN
Roller
Mill
Model
Roll
WxD
(in.)
Shaft
Dia.
(in.)
Min
(PTO)
HP
Conveyor
Dischg
Hyd
Feed
Auger
***
Corn
RMC 48
48x16
2 15/16
Consult Factory
36"
 
 
RMC 2X36 Tandem Mill
(2)36x16
2 15/16
Consult Factory
36"
 
 
RMC 2X48 Tandem Mill
(2)48x16
2 15/16
Consult Factory
36"
 
 
*** Maximum rated capacity
** Bushel/Hour
* Tonne/Hour

Capacity will change with moisture content, roll configuration and particle size desired.


MODEL DESCRIPTION BACKFREIGHT PRICE
Large Grains, Chill Cast Rolls
*Note: Specify Groove Pattern: 4, 5, 6, or 8 g.p.i.*
RN9748-500 Model RMC48 PTO Roller Mill - Includes 18" hydraulic folding conveyor discharge $ $63,035
RN9736-500 Model RMC 2x36 (Tandem) PTO Roller Mill - Includes 36" hydraulic folding conveyor discharge. Consult factory for PTO and operating speed requirements $ $87,985
RN9748-600 Model RMC 2x48 (Tandem) PTO Roller Mill - Includes 36" hydraulic folding conveyor discharge. Consult factory for PTO and operating speed requirements $ $109,105
Large Grains, Differential Drive, Chill Cast Rolls
*Note: Specify Groove Pattern: 4, 5, 6, 8, 10, 12, or 15 g.p.i.*
RN9748-430 Model RMC48 PTO Roller Mill - Includes 18" hydraulic folding conveyor discharge, differential drive, 1000 PTO $ $72,790
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - F.O.B. FACTORY
PRICES UPDATED 1/1/14

 TOP  OF  PAGE 

Renn Electric Corn Mills
Features:
•  Electric Drive Kit (less motor)
•  Feed Gate Control
•  Tip-Up Feed Hopper
•  2 gpi Flat Roll
•  Leaf Spring Roll Protection
•  Worm Drive Roll Adjustment
•  Magnet
•  Drop Hopper or Cross Auger Bearing Support

RENN
Roller
Mill
Model
Roll
WxD
(in.)
Shaft
Dia.
(in.)
Min.
Elec.
HP
Min
(PTO)
HP
Auger
Dischg
Hyd
Feed
Auger
***
Corn
RMC 12
12x16
1 15/16
10
25
7" or 8"
6" or 8"
27*
1000**
RMC 24
24x16
1 15/16
20
60
7", 8" or 10"
6", 8" or 10"
54*
2000**
RMC 30
30x16
2 7/16
30
80
7", 8" or 10"
8" or 10"
68*
2500**
RMC 36
36x16
2 15/16
40
100
8", 10" or 12"
8" or 10"
81.6*
3000**
*** Maximum rated capacity
** Bushel/Hour
* Tonne/Hour

Capacity will change with moisture content, roll configuration and particle size desired.


MODEL DESCRIPTION BACKFREIGHT PRICE
Small Grain, Chill Cast Rolls
*Note: Specify Groove Pattern: 10, 12, or 15 g.p.i.*
RN9112-215 Model RMC12-E Electric Roller Mill - Includes bottom hopper and cross auger bearing support (LESS Motor) $ $16,680
RN9124-215 Model RMC24-E Electric Roller Mill - Includes bottom hopper and cross auger bearing support (LESS Motor) $ $20,120
RN9130-215 Model RMC30-E Electric Roller Mill - Includes bottom hopper and cross auger bearing support (LESS Motor) $ $24,890
Small Grain, Differential Drive, Chill Cast Rolls
*Note: Specify Groove Pattern: 10, 12, or 15 g.p.i.*
RN9112-230 Model RMC12-E Electric Roller Mill - Includes bottom hopper and cross auger bearing support (LESS Motor) $ $22,355
RN9124-230 Model RMC24-E Electric Roller Mill - Includes bottom hopper and cross auger bearing support (LESS Motor) $ $29,415
RN9130-230 Model RMC30-E Electric Roller Mill - Includes bottom hopper and cross auger bearing support (LESS Motor) $ $34,190
Large Grain, Chill Cast Rolls
*Note: Specify Groove Pattern: 4, 5, 6, or 8 g.p.i.*
RN9112-220 Model RMC12-E Electric Roller Mill - Includes bottom hopper and cross auger bearing support (LESS Motor) $ $16,695
RN9124-220 Model RMC24-E Electric Roller Mill - Includes bottom hopper and cross auger bearing support (LESS Motor) $ $20,155
RN9130-220 Model RMC30-E Electric Roller Mill - Includes bottom hopper and cross auger bearing support (LESS Motor) $ $24,935
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - F.O.B. FACTORY
PRICES UPDATED 1/1/14

 TOP  OF  PAGE 

Renn Auxiliary PTO Mills
A RENN™ roller mill with the auxiliary PTO offers the flexibility of rolling directly into the bagger, or can be detached and operated as an independent PTO roller mill.

A RENN™ roller mill with auxiliary PTO, industrial trailer and rear hitch assembly gives you the benefit of rolling and bagging your grain in one smooth operation. Link the RENN™ roller mill between your tractor and bagger and your feed processing can benefit from the following advantages:
1. The convenience of rolling and bagging in one operation.
2. High capacity rolling and bagging allows for maximized harvest efficiency.
3. Fuel savings as a result of operating two machines with only one tractor.
4. Reduced labour and equipment cost due to operational efficiency.
5. Maximized equipment utilization with the additional products that can be processed through your bagger.

The precision-machined 16" diameter rolls are the heart of our roller mill. With the worm drive roll adjustment on the drive roll and our leaf spring roll protection on the driven roll you are able to easily set and maintain the gap necessary to produce the product your livestock require.
Features:
•  16" diameter rolls
•  Hydraulic drive feed auger c/w low profile transfer auger
•  Dynamically balanced rolls
•  Worm drive roll adjustment
•  Laser cut precision construction
•  RENN's leaf spring roll protection
•  Cut away frame for quick removal of rolls
•  Hinged top hopper for easy roll inspection
•  Over running clutch PTO with shear bolt protection
•  Top hopper with feed-gate shut-off
•  Tubular frame trailer c/w rear hitch assembly
•  112 degree rigid mount discharge auger
•  Direct drive auxiliary PTO

Model
Roll
WxD
(in.)
Shaft
Dia.
(in.)
Min
HP
Roller
Dischg
Auger
112 Degree
Dischg
Auger
90 Degree
Hyd
Feed
Auger
Differential
Roll Speed
***
Barley
***
Wheat
***
Oats
***
Corn
RMC 30
30x16
2 7/16
80
STD
OPT
STD
OPT
17.4*
800**
32.6*
1200**
10.4*
600**
68*
2500**
RMC 36
36x16
2 15/16
100
STD
OPT
STD
OPT
21.8*
1000**
38*
1400**
12*
700**
81.6*
3000**
RMC 48
48x16
2 15/16
120
STD
OPT
STD
OPT
26*
1200**
54*
2000**
17*
1000**
108*
4000**
*** Maximum rated capacity
** Bushel/Hour
* Tonne/Hour
Specifications subject to change without notice.

Capacity will change with moisture content, roll configuration and particle size desired.


MODEL DESCRIPTION BACKFREIGHT PRICE
Chill Cast Rolls, Differential Drive Mechanical Disharge
RN9730-020 Model RMC30-A Auxiliary PTO Roller Mill -Includes 12" x 8' Discharge, 10" x 10' Transfer Style Feed Auger $ $52,095
RN9736-020 Model RMC36-A Auxiliary PTO Roller Mill - Includes 12" x 8' Discharge, 12" x 10' Transfer Style Feed Auger $ $63,195
RN9748-020 Model RMC48-A Auxiliary PTO Roller Mill - Includes 14" x 8' Discharge, 12" x 10' Transfer Style Feed Auger, 1000 PTO $ $79,355
Chill Cast Rolls, 1:1 Drive, Mechanical Disharge
RN9730-030 Model RMC30-A Auxiliary PTO Roller Mill - Includes 12" x 8' Discharge, 10" x 10' Transfer Style Feed Auger $ $43,260
RN9736-030 Model RMC36-A Auxiliary PTO Roller Mill - Includes 12" x 10' Discharge, 12" x 10' Transfer Style Feeder Auger $ $52,515
RN9748-030 Model RMC48-A Auxiliary PTO Roller Mill - Includes 14" x 8' Discharge, 12" x 10' Transfer Style Feed Auger $ $68,385
Chill Cast Rools, Differential Drive, Self Contained Hydraulics
RN9736-130 Model RMC36-A Auxiliary PTO Roller Mill - Includes 12" x 10' Hyd Discharge, 12" x 10' Transfer Style Feed Auger $ $73,885
RN9748-131 Model RMC48-A Auxiliary PTO Roller Mill - Includes 14" x 11' Hyd Discharge, 12" x 10' Transfer Style Feed Auger, 1000 rpm $ $88,875
RN8700-010 Gear Reduction Kit - 1000 rpm input - 1000/540 rpm dual output $ $5,715
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - F.O.B. FACTORY
PRICES UPDATED 1/1/14

 TOP  OF  PAGE 

Renn Blower Mills
If you are in the market for dairy feeding equipment or beef feeding equipment, the RENN™ blower mill is built to handle high volumes of high moisture corn and corn silage.

RENN™ offers the industry's largest and heaviest built blower mill. The RENN™ blower mill is designed for producers to process their shell corn as efficiently as possible. With the large 16" diameter RENN™ rolls, you can process large volumes of corn how you want it, then place it where you want it with our 59", 8-blade blower.

With the addition of the factory installed RENN™ silage pro kit to RENN™ blower mill, the producer is able to realize the increased benefits from processed corn silage. The well-documented advantages of rolled corn silage, such as lower feed cost and increased milk production, will become evident.

RENN™ offers the industry's largest and heaviest built blower mill. The RENN™ blower mill is designed for producers to process their shell corn as efficiently as possible. With the large 16" diameter RENN™ rolls, you can process large volumes of corn how you want it, then place it where you want it with our 59" 8 blade blower.
Features:
•  16" diameter rolls (largest in the industry)
•  Sturdy construction with heavy duty shafts and bearings
•  Dynamically balanced rolls
•  Chill cast rolls
•  Heavy duty leaf spring roll protection
•  Worm drive roll adjustment
•  540 PTO with shear protection
•  Groove configurations from 4gpi to 12gpi
•  Capacity up to 4000 bu/hr corn
•  Cut away frame allows for fast and simple removal of rolls
•  Top hopper hinged for fast and easy access to rolls
•  Spindle mounted feed conveyor or auger
•  14" diameter cross auger
•  8 blade - 59" blower

RENN
Blower
Mill
Model
Roll WxD
(in.)
Shaft/
Bearing
PTO
Blower
Dia./
Blades
Min HP
(PTO)
PTO
Feed
Auger
**
Corn
bu/hr
RBM 24
24x16
1 15/16"
59"/8
110
540
STD
2000
RBM 30
30x16
2 7/16"
59"/8
125
540
STD
2500
RBM 36
36x16
2 15/16"
59"/8
140
540
OPT
3000
RBM 48
48x16
2 15/16"
59"/8
160
540
N/A
4000
* Maximum rated capacity (Bushel/Hour)
Specifications subject to change without notice.

Capacity will change with moisture, roll corrugation and particle size desired.


MODEL DESCRIPTION BACKFREIGHT PRICE
Chill Cast Rolls, Standard Mill
*Note: Specify Groove Pattern: 5,6,8, or 10 g.p.i.*
RN9324-020 Model RBM24 Blower Mill - Includes 10" x 10' feed auger $ $39,785
RN9330-020 Model RBM30 Blower Mill - Includes 10" x 10' feed auger $ $46,210
RN9336-020 Model RBM36 Blower Mill - Includes 12" x 10' feed auger $ $51,560
Chill Cast Rolls, Differential Drive Mill
*Note: Specify Groove Pattern: 5,6,8, or 10 g.p.i.*
RN8324-030 Model RBM24 Blower Mill - Includes 10" x 10' feed auger $ $45,810
RN9330-030 Model RBM30 Blower Mill - Includes 10" x 10' feed auger $ $52,775
RN9336-030 Model RBM36 Blower Mill - Includes 12" x 10' feed auger $ $61,740
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - F.O.B. FACTORY
PRICES UPDATED 1/1/14
  MANUFACTURER   INDEX  
  PRODUCT   INDEX  
  HOME  
  SECTIONS   -    A     B     C     D     E     F     G     H     I     J      -   SECTIONS