|
GRAVITY WAGON AUGER |
| 6" Gravity Wagon Auger is available in 12 and 15
foot lengths and three hopper widths of 33, 44 and 60 inches. The Gravity Wagon Auger includes 4.5 cubic inch
hydraulic motor with 12 volt electric solenoid control valve, two-section 14-1/2' telescoping spout with
on/off switch, clean out door with cam lock, brake winch for auger height and angle adjustment, and mounting
brackets LESS hydraulic hose and hose couplers. Hopper must be ordered seperately. Requires a minimum of 8.0 GPM at 1400 PSI
(maximum of 12.0 GPM). |
| WFGWA612 | 6" x 12' auger |
$1,509 | 200 lbs |
| WFGWA612-B | 6" x 12' auger-with bristle flighting |
$1,751 | 200 lbs |
| WFGWA612-P | 6" x 12' auger-with poly flighting |
$1,854 | 245 lbs. |
| WFGWA615 | 6" x 15' auger |
$1,751 | 245 lbs |
| WFGWA615-B | 6" x 15' auger-with bristle flighting |
$1,920 | 245 lbs |
| WFGWA615-P | 6" x 15' auger-with poly flighting |
$2,179 | 245 lbs |
| The Gravity Wagon Hopper, including one-pin mount system and rubber skirting, must be ordered in
seperate components. NEW PRODUCT: 60" WIDE HOPPER. |
| WFGWH-633 | 33"wide hopper |
$168 | 42 lbs |
| WFGWH-644 | 44"wide hopper |
$235 | 60 lbs |
| WFGWH-660 | 60" wide hopper |
$352 | 72 lbs |
|
REPLACEMENT TELESCOPING SPOUTS |
| Replacement Telescoping Spouts for rear or side mount drill
fills extend to 14-1/2'; with 18" or 6" inside diameter flex hose, hose attach clamps and handle. |
| WFA142 | 2 section spout |
$168 | 14 lbs |
| WFA143 | 3 section spout |
$231 | 17 lbs |
PRICES DO NOT INCLUDE SHIPPING OR SETUP - PRICED F.O.B. FACTORY
UPDATED 4/24/08 |
|
