| MODEL |
DESCRIPTION |
WEIGHT |
BACKFREIGHT |
PRICE |
Shipped complete with shielded CV PTO driveline equipped with overload shear bolt, hydraulic lift cylinder with hose and
shut-off valve (two lift cylinders on the MK 100 x 91') standard or low-profile feed hopper (as ordered) complete with drive,
hopper lift system with 5:1 winch, intake boot hopper with tow bar and hitch jack. LESS tires, tubes, and tractor-end hydraulic couplers.
NOTE: MK100 x 81 and MK100 x 91 augers are shipped with bias ply tires mounted on rims.
NOTE: MK100 x 36 augers use a manual winch for lift
NOTE: Hoses for the hydraulic motor on hydraulic drive hoppers are included LESS the tractor-end hydraulic couplers. |
|
CLICK HERE FOR
WESTFIELD ACCESSORIES |
|
MK80 / MK100 AUGERS with mechanical drive STANDARD HOPPER |
| WFMK80 x 51G |
8" X 51' auger |
1,810 lbs. |
$235.30 |
$7,882 |
| WFMK80 x 61G |
8" x 61' auger |
2,050 lbs. |
$266.50 |
$8,529 |
| WFMK80 x 71G |
8" x 71' auger |
2,270 lbs. |
$295.10 |
$9,426 |
| WFMK100 x 36G |
10" x 36' auger |
1,585 lbs. |
$206.05 |
$7,474 |
| WFMK100 x 51G |
10" x 51' auger |
2,110 lbs. |
$274.30 |
$9,119 |
| WFMK100 x 61G |
10" x 61' auger |
2,420 lbs |
$314.60 |
$9,726 |
| WFMK100 x 71G |
10" x 71' auger |
2,650 lbs |
$344.50 |
$10,465 |
| WFMK100 x 81G |
10" x 81' auger |
3,120 lbs. |
$405.60 |
$12,542 |
| WFMK100 x 91G |
10" x 91' auger |
4,910 lbs.
| $638.30 |
$19,333 |
|
MK80 / MK100 AUGERS with hydraulic drive STANDARD HOPPER |
| WFMK 80 x 51H |
8" X 51' auger |
1,775 lbs. |
$230.75 |
$8,112 |
| WFMK 80 x 61H |
8" x 61' auger |
2,015 lbs. |
$261.95 |
$8,756 |
| WFMK 80 x 71H |
8" x 71' auger |
2,235 lbs. |
$290.55 |
$9,658 |
| WFMK100 x 51H |
10" x 51' auger |
2,075 lbs. |
$269.75 |
$9,347 |
| WFMK100 x 61H |
10" x 61' auger |
2,385 lbs. |
$310.05 |
$9,952 |
| WFMK100 x 71H |
10" x 71' auger |
2,615 lbs. |
$339.95 |
$10,690 |
| WFMK100 x 81H |
10" x 81' auger |
3,085 lbs |
$401.05 |
$12,727 |
| WFMK100 x 91H |
10" x 91' auger |
4,875 lbs |
$633.75 |
$19,563 |
|
MK100 AUGERS with mechanical drive LOW PROFILE HOPPER |
| WFMK100 x 36GLP |
10" x 36' auger |
1,790 lbs. |
$232.70 |
$8,284 |
| WFMK100 x 51GLP |
10" x 51' auger |
2,310 lbs |
$300.30 |
$9,775 |
| WFMK100 x 61GLP |
10" x 61' auger |
2,620 lbs |
$340.60 |
$10,369 |
| WFMK100 x 71GLP |
10" x 71' auger |
2,850 lbs |
$370.50 |
$11,105 |
| WFMK100 x 81GLP |
10" x 81' auger |
3,320 lbs |
$431.60 |
$13,080 |
| WFMK100 x 91GLP |
10" x 91' auger |
5,110 lbs |
$664.30 |
$20,038 |
|
MK100 AUGERS with hydraulic drive LOW PROFILE HOPPER |
| WFMK100 x 51HLP |
10" x 51' auger |
2,275 lbs |
$295.75 |
$10,001 |
| WFMK100 x 61HLP |
10" x 61' auger |
2,585 lbs |
$336.05 |
$10,593 |
| WFMK100 x 71HLP |
10" x 71' auger |
2,815 lbs |
$365.95 |
$11,333 |
| WFMK100 x 81HLP |
10" x 81' auger |
3,285 lbs |
$427.05 |
$13,267 |
| WFMK100 x 91HLP |
10" x 91' auger |
5,075 lbs |
$659.75 |
$20,266 |
MK130(PLUS)
Westfield's largest capacity auger; the MK130Plus series, With all the quality and ease-of use features you customers
have come to expect in the popular MK line, the MK130Plus series also has these farmer-tested upgrades.
*1/4" flighting on main and
swing augers for increased durability
*Heavier gearboxes for longer trouble-free operation
*A threaded upper flight stub for easier,
more accurate set-up
*81', 91', and 111' sizes offer extendable axles for stability at the bin site and narrower transport width
*Shipped complete with shielded CV-PTO driveline equipped with overload shear bolt, dual hydraulic lift cylinders with hose and
shut off valve, standard or low-profile feed hopper (as ordered) complete with drive, hopper lift system with 5:1 winch, intake boot
hopper with tow bar and hitch jack. 16" tires and rims are standard in 2010
*LESS tractor-end hydraulic couplers |
|
MK130(PLUS) AUGERS with mechanical drive LOW PROFILE HOPPER |
| WFMK130(PLUS) x 81GLP |
13' x 81' auger |
5,920 lbs. |
$769.60 |
$19,575 |
| WFMK130(PLUS) x 91GLP |
13" x 91' auger |
6,690 lbs. |
$869.70 |
$24,389 |
PRICES DO NOT INCLUDE SHIPPING OR SETUP - PRICED F.O.B. FACTORY
UPDATED 1/1/13 |
|
MK80 MK100 MK130
The big MK130 has dual 4" hydraulic lift cylinders
Sturdy
Only
Heavy
X-braced top mounted pipe and 3/8 side-cable trussing provides maximum support
with full bin reach. Heavy 1/4 angle track adds further support.
Upper bearing thrust adjuster allows flighting pressure to be equalized on both
upper and lower bearings for smoother operation, longer flight life. 
Only 10.5" high. Pivot point keeps hopper flat on the ground. Large 40
x 63 intake area with dual flighting. Equipped with four large pneumatic wheels.
Operate the tractor control and smoothly raise the MK
in less than a minute. One person can transport, raise
and position the auger from the tractor seat. 
The 4” hydraulic cylinder has heavy 5/16” steel lift
cable with 9,800 lbs. yield strength. Cables run in
large cast iron cable sheaves equipped with bronze bushings.
Shut-off valve in hydraulic line prevents auger from creeping down. 
Our longer, lower-profile swinghopper, quickly switched to right or
left-hand operation, fits under most grain trailers. The vertical
transport position provides quick, easy cleanout. 
Spring-loaded safety discharge door on the intake hopper
guards against main auger overloading. 
Our redesigned lift assist and double roller trackshoe reduces
pressure needed to raise the auger and provides a lower transport position.
The Constant Velocity (CV) PTO shaft, equipped with overload
shear bolt, is standard equipment. It assures smooth operation
and longer wear. (Shown with shield partially removed to show detail.) 
A Westfield design constant velocity angle-drive replaces the
u-joint in the redesigned feed hopper, eliminating the velocity
fluctuation vibrations for smoother running and less stress on the drive train. 
The Westfield designed angled gear box drive is enclosed
for safer operation. Note large opening in the boot for
unrestricted grain flow. The boot incorporates an exclusive
Westfield designed “Enhanced Grain Pickup System” which
maintains constant grain flow as the auger is raised. 
Upper bearing thrust adjuster allows flighting pressure to be equalized on both upper and lower bearings
for smoother operation, longer flight life.
All MK augers are equipped with an overlaod shear bolt. The CV-PTO shaft, assures smooth operation with vibration-free
running,longer wear and constant high capacity grain flow.
Optional on MK130Plus models. Allows operation
with high horsepower tractors-reverser included.
Ability to reverse all flighting. Allows quick and easy
clean out (shown with guards removed for clarity).
• Low-profile — just 10 1/2” high (measured to top of metal portion).
Fits under low hopper-bottom grain trailers.
