Homepage WESTFIELD
  QUICK-MOUNT REAR DRILL FILL/TAILGATE AUGERS  
  MANUFACTURER   INDEX  
  PRODUCT   INDEX  
  HOME  
  BACK  
  SECTIONS   -    A     B     C     D     E     F     G     H     I     J      -   SECTIONS  
Request Postal Mail Brochure  CONTACT  US 
Email Questions or Comments

This data duplicated from THE WESTFIELD WEB SITE
QUICK-MOUNT REAR DRILL FILL AUGERS
With Quick-Release One Pin Mounting
Designed for easier bulkhandling

It’s on or off in a jiffy with one single mounting pin. You don’t even need a wrench. The long 6" by 15½’ auger allows full tarping of the load. And there’s a convenient remote on-off control on the 14½" telescoping downspout. The 4.2 cu. in. hydraulic motor with standard 12 volt solenoid control is located at the bottom of the auger requiring minimum plumbing.

DRILL FILL FEATURES


Spring-assisted lift has mechanical linkage with improved leverage for easier raising and lowering.

Handy clean-out door and quick-dump chute.

On or off in a jiffy with a single, heavy-duty quick-release mounting pin.
SIDE MOUNT REAR DRILL FILL
SIDE-MOUNTED DRILL FILL
High capacity 6" Side-Mount Drill Fills in 11’, 16’ and 21’ models mount quickly to any truck (bracket included). Safety shielded intake, long handled feed control and telescoping 14½’ downspout are standard. Powered by a 4.2 cu. in. hydraulic motor. Optional 12 volt solenoid control valve with remote on/off control.
CLICK HERE FOR WESTFIELD ACCESSORIES
REAR MOUNT DRILL FILL
Rear mount 6" x 15-1/2' fold down drill fill with ONE-PIN mount system for quick on/off, SPRING ASSISTED lift with ground level lever for transport/operate positioning. 4.5 cubic inch hydraulic motor with 12 volt electric solenoid control valve. 14-1/2' telescoping spout with on/off switch, clean out door with cam lock, large opening in hopper for quick dumping of grain, mounting brackets. Requires a minimum of 8.0 GPM at 1400 PSI (maximum of 12.0 GPM).
WFDF614 Auger W/Steel Flighting 215 lbs $40 B.F. $1,690
WFDF614-B Auger W/Bristle Flighting 220 lbs $40 B.F. $2,044
WFDF614-P Auger W/Poly Flighting 220 lbs $40 B.F. $2,223
CRSSV Single splitter valve for power up only hyd. system     $62
CRDSV Double splitter valve for power up & down hyd. systems     $108
Optional Splitter Valves are for Rear Mount & Side Mount Drill Fill Augers when plumbing Auger Into the Truck Hydraulic System.
SIDE MOUNT DRILL FILL
Mounts to side of truck box, 6" diameter, shipped with intake flight shield, feed control gate, 4.5 cubic inch hydraulic motor, 14-1/2" telescoping spout, truck box mounting bracket, LESS electronic solonoid control valve kit (optional).
WFD1106 6" x 11' Drill Fill W/Steel Flight 118 lbs. $40 B.F. $1,146
WFD1606 6" x 16' Drill Fill W/Steel Flight 150 lbs. $40 B.F. $1,252
WFD2106 6" x 21' Drill Fill W/Steel Flight 182 lbs. $40 B.F. $1,360
WFD1106-B 6" x 11' Drill Fill W/Bristle Flight 120 lbs. $40 B.F. $1,416
WFD1606-B 6" x 16' Drill Fill W/Bristle Flight 152 lbs. $40 B.F. $1,650
WFD2106-B 6" x 21' Drill Fill W/Bristle Flight 185 lbs. $40 B.F. $1,879
Optional Solenoid Control Valve Kit, 12 volt electric, for side mount drill fills, allows remote shut off Shipped with solenoid valve, on/off switch wiring and wire clips.
WFD1212 Solenoid Kit 4 lbs.   $282
REPLACEMENT TELESCOPING SPOUTS
Replacement Telescoping Spouts for rear or side mount drill fills extend to 14-1/2'; with 18" or 6" inside diameter flex hose, hose attachment clamps and handle.
WFA142 2 Section Spout 14 lbs.   $191
WFA143 3 Section Spout 17 lbs.   $262
PRICES DO NOT INCLUDE SHIPPING OR SETUP - PRICED F.O.B. FACTORY
UPDATED 1/1/14
  MANUFACTURER   INDEX  
  PRODUCT   INDEX  
  HOME  
  SECTIONS   -    A     B     C     D     E     F     G     H     I     J      -   SECTIONS