|
CLICK HERE FOR
WESTFIELD ACCESSORIES |
|
13" GRAIN AUGERS, EMD AND PTO-SD |
| Shipped complete with tube mounted motor mount, triple belts
and pulley, outlet spout, tow hitch, safety shields, and winch, LESS electric motor and switches, motor
pulley, tires and tubes. Recommended pulley size: 4.3" to 4.5" for 1750 RPM motors. |
| WFW130-41EMD |
13" x 41' auger |
2,150 lbs. |
$258 B.F. |
$7,091 |
| Shipped complete with shielded non-seperable 60" PTO driveline,
transport saddle for PTO driveline, outlet spout, tow hitch, safety shields and winch, LESS tires and tubes. |
| WFW130-41SD |
13" x 41' auger |
2,100 lbs. |
$252 B.F. |
$7,250 |
| Shipped complete with shielded non-seperable 72" PTO driveline,
transport saddle for PTO driveline, outlet spout, tow hitch, safety shields and winch, dual hydraulic cylinder
lift system. Complete w/16 Bias Tires mounted on 16" rims. |
| WFW130-51SD |
13" x 51' auger |
2,975 lbs. |
$357 B.F. |
$12,048 |
| WFW130-61SD |
13" x 61' auger |
3,440 lbs. |
$412.80 B.F. |
$13,347 |
| WFW130-71SD |
13" x 71' auger |
3,935 lbs. |
$472.20 B.F. |
$14,960 |
| OPTIONAL CORN SCREEN available for all 51 foot and longer
8", 10", and 13" augers. FACTORY INSTALLED BY SPECIAL ORDER. Screen is located on the lower or center tube
on WR80, WR100, and WR130 auger. Screen section is up to 48" long with 3/16" holes on 9/32" staggered
centers, shipped complete with cover. |
| WFA147 |
8" Screen |
43" long |
|
$265 |
| WFA148 |
10" Screen |
48" long |
|
$295 |
| WFA185 |
13" Screen |
48" long |
|
$431 |
PRICES DO NOT INCLUDE SHIPPING OR SETUP - PRICED F.O.B. FACTORY
UPDATED 1/1/10 |
|
Available on all models. Heavy duty gear box with forged steel gears and
tapered roller bearings sized to match this high capacity auger.
The PTO driveline on 51’ to 71’ models is equipped with shear bolt.
Gear box can be flipped over for right or left side drive. 
41’ model is available with a sturdy, underslung electric motor drive.
Large triple-groove pulley and three belts are standard equipment. 
Dual 4 single acting lift cylinders have large cast iron cable sheaves with
bronze bushings. Dual galvanized 5/16” aircraft type cables with total lift yield
of 19,600 lbs.(on 51’ to 71’ models). Equipped with shut off valve.
Double 3” steel rollers (41’ has single roller) with oiled hardwood bearings
for smooth easy raising. Runs on heavy angle track.
Large hardened steel sprockets, high speed roller chain and sealed ball bearings
are sized to match this large auger. Lubricated upper drive adds years
of life to the drive components. 
Shielded for operator protection with quick remove tow clevis. Heavy double
flighting at intake increases capacity. 
Sturdy 6 bolt cast iron hubs with tapered roller bearings and heavy gauge 15”
wheels, standard on 51’ to 71’ models. (4 bolt on 41’) 
Specifications and design subject to change without notice or obligation