|
CLICK HERE FOR
WESTFIELD ACCESSORIES |
|
8" MD GRAIN AUGERS gas or electric motor drive |
| Shipped complete with motor mount, double belt
and pulley, standard outlet spout, tow hitch, saftey shields and winch, LESS engine, engine
pulley, tires and tubes. Recommended pulley size: 4.2" for gas engines, 7" for 1750 RPM electric
motors. |
| WFWR80-26 MD |
8" x 26' AUGER |
655 lbs. |
$85.15 B.F. |
$2,505 |
| WFWR80-31 MD |
8" x 31' AUGER |
750 lbs. |
$97.50 B.F. |
$2,868 |
| WFWR80-36 MD |
8" x 36' AUGER |
835 lbs. |
$108.55 B.F. |
$3,173 |
| WFWR80-41 MD |
8" x 41' AUGER |
935 lbs. |
$121.55 B.F. |
$3,434 |
|
8" EMD GRAIN AUGERS electric motor drive, mount on tube |
CLICK HERE FOR
PULLEYS,
YAMAKOYO GAS ENGINES,
KOHLER GAS ENGINES, &
DAYTON ELECTRIC MOTORS
|
| Shipped complete with tube mounted electric
motor mount, double belts and pulley on 26' to 51, tripple belts and pulley on 56' to 71',
standard outlet spout, tow hitch, saftey shields and winch, LESS electric motor and switches,
motor pulley, tires and tubes. For 1750 RPM electric motors recommended pulley sizes are: 6.5"
to 7" for 26' to 51' augers; 4.3" to 4.5" for 56' to 71' augers. |
| WFWR80-26 EMD |
8" x 26' AUGER |
3-5 HP Req'd |
650 lbs. |
$84.50 B.F. |
$2,717 |
| WFWR80-31 EMD |
8" x 31' AUGER |
5 HP Req'd |
745 lbs. |
$96.85 B.F. |
$3,077 |
| WFWR80-36 EMD |
8" x 36' AUGER |
5-7.5 HP Req'd |
840 lbs. |
$109.20 B.F. |
$3,400 |
| WFWR80-41 EMD |
8" x 41' AUGER |
5-7.5 HP Req'd |
940 lbs. |
$122.20 B.F. |
$3,664 |
| WFWR80-46 EMD |
8" x 46' AUGER |
7.5 HP Req'd |
1,060 lbs. |
$137.80 B.F. |
$4,222 |
| WFWR80-51 EMD |
8" x 51' AUGER |
7.5 HP Req'd |
1,130 lbs. |
$146.90 B.F. |
$4,595 |
| WFWR80-56 EMD |
8" x 56' AUGER |
10 HP Req'd |
1,500 lbs. |
$195.00 B.F. |
$5,603 |
| WFWR80-61 EMD |
8" x 61' AUGER |
10 HP Req'd |
1,580 lbs. |
$205.40 B.F. |
$5,900 |
| WFWR80-71 EMD |
8" x 71' AUGER |
15 HP Req'd |
1,800 lbs. |
$234.00 B.F. |
$6,465 |
|
8" PTO-BD GRAIN AUGERS belt drive power take-off |
| Shipped complete with double belt and pulley,
shielded non-separable 48" PTO driveline, transport saddle for PTO driveline, standard outlet
spout, tow hitch, saftey shields and winch, LESS tires and tubes. |
| WFWR80-36 BD |
8" x 36' AUGER |
935 lbs. |
$121.55 B.F. |
$3,892 |
| WFWR80-41 BD |
8" x 41' AUGER |
1,035 lbs. |
$134.55 B.F. |
$4,167 |
| WFWR80-46 BD |
8" x 46' AUGER |
1,150 lbs. |
$149.50 B.F. |
$4,716 |
| WFWR80-51 BD |
8" x 51' AUGER |
1,230 lbs. |
$159.90 B.F. |
$4,937 |
|
8" SD GRAIN AUGERS gearbox mounted near bottom of tube |
| Shipped complete with shielded non-separable
60" PTO driveline, transport saddle for PTO driveline, standard outlet spout, tow hitch,
saftey shields and winch, LESS tires and tubes. |
| WFWR80-31 SD |
8" x 31' AUGER |
765 lbs. |
$99.45 B.F. |
$3,365 |
| WFWR80-36 SD |
8" x 36' AUGER |
855 lbs. |
$111.15 B.F. |
$3,651 |
| WFWR80-41 SD |
8" x 41' AUGER |
960 lbs. |
$124.80 B.F. |
$3,939 |
| WFWR80-46 SD |
8" x 46' AUGER |
1,100 lbs. |
$143.00 B.F. |
$4,521 |
| WFWR80-51 SD |
8" x 51' AUGER |
1,180 lbs. |
$153.40 B.F. |
$4,738 |
| WFWR80-56 SD |
8" x 56' AUGER |
1,490 lbs. |
$193.70 B.F. |
$5,768 |
| WFWR80-61 SD |
8" x 61' AUGER |
1,570 lbs. |
$204.10 B.F. |
$6,066 |
| WFWR80-71 SD |
8" x 71' AUGER |
1,800 lbs. |
$234.00 B.F. |
$6,643 |
PRICES DO NOT INCLUDE SHIPPING OR SETUP - PRICED F.O.B. FACTORY
UPDATED 04/01/12 |
|
Our unique Motor Drive auger doesnt use a gear box. Power is transferred through two needle bearing universal joints for maximum power to the flighting. The engine mounts crosswise for easier, safer starting from the side of the auger. The motor mount - for either gas engine or electric motor - is self leveling at all auger positions. Double belt drive with adjustable tension is standard on 7 and 8 augers. Belts are easily replaced by removing and replacing the pulley shield and two bolts. (see operators manual).
Electric Motor Drive is available for all auger sizes. The motor mounts firmly to the gear box and auger tube. A threaded adjustment allows positive belt tension. Double belt drive is standard on augers up to 8 x 51 feet. Triple belt drive is standard on longer 8 and all 10 models.
Our popular PT0 Belt Drive has belts running from the gear box to a jackshaft near the auger wheels. This places the tractor away from the auger intake allowing added working room and longer reach into bins. The drive can be positioned for right or left hand drive. Anti-belt-whip guides, non-separable 48 PT0 driveline (65 extended), and handy driveline transport saddle are standard. Single drive belt on 6 models and double drive belts on 7and 8 models are tension adjustable.
Our PTO Shaft Drive models feature a gear box connected directly to the auger driveshaft with a flex coupler and shear bolt for the most positive auger drive available. The gear box can be flipped for right or left hand drive. A nonseparable 60 P10 driveline (extends to 80) and a handy driveline transport saddle are standard.
The auger intake, shielded for operator protection, has a long one-pin quick-remove
clevis. Intake flight has new welded Wear Edge for long life with special low pitch
for proven added capacity. Easily replaced. Greaseable Oilite bearing centers flight
reducing vibration and wear.
Heavy duty hardened steel sprockets and high speed roller chain are sized to match auger length and diameter.
Lubricated upper drive adds years of life to sprockets and drive chain. Now standard equipment on all models. 
All gear boxes have top quality forged steel gears with tapered roller bearings running in oil for years of dependable service. Gear box can be flipped for right or left hand PTO drive. 
Undercarriages of heavy steel tubing are designed for each specific auger length for better balance and stability. Added cross bracing is used on larger models. Upper lift arms sit back from the axle and quickly tuck away for excellent bin eave clearance. Wide axles provide added stability. High speed wheels with cast iron hubs and tapered roller bearings are standard.
Rigid roll-formed track beneath the auger tube provides excellent support. Augers 46 and longer have heavy cable trussing for extra support and positive tube alignment. 
Roller with oiled hardwood bearings reduces effort needed to raise auger. 
Driveshaft bearings of durable oil-impregnated hardwood, for long, quiet operation, are easily replaced if necessary, requiring no disassembly of driveshaft. Bearing brackets are factory jig welded for precise alignment.
All bearings are matched to auger size from the flangette type ball bearings on smaller augers to the heavy duty cast iron flange ball bearings on larger models.
Safety winch with automatic brake is sized and geared to match the auger. The strong 1/4 galvanized aircraft type cable has 7000 lbs. break strength. 