SECTIONS   -    A     B     C     D     E     F     G     H     I     J      -   SECTIONS  
Request Postal Mail Brochure  CONTACT  US 
Email Questions or Comments

This data duplicated from THE WESTFIELD WEB SITE
Westfield MKX 130 Swing Hopper Augers

Shown Above with Optional Power Swing
Westfield's largest capacity auger ever...the MKX 130 series! With all the quality and ease-of-use features you customers have come to expect in the popular MK130PLUS line.
Standard Features:
Steel Trussing
Trussing provides maximum strength and stability at all heights. Steel trussing on 84', 94, & 114' units increase tube rigidity and ensure smooth operation.

Powder Coat Paint
Westfield uses a premium powder coat on all painted parts for durability and a great looking finish.

Continuous 1/4" track welded to tube for increased stability and structural support.

A-Frame Undercarriage
Heavy-duty A-Frame undercarriage for stability and long lasting performance.

Extendable Axles
Wide stance for stable operation at the bin, adjustable axle extensions for reduced transport width (84', 94' & 114')

Wear Edge
Continuous 10 gauge ribbon welded to flighting edge where most of the wear occurs. Standard on all MKX 130 Series augers at critical grain transfer points.

Flight Connection
Square one bolt flight connection provides improved performance.

Hopper Lift Arm
Can be quickly changed from the left or right hand side of the auger to give the operator the convenience of unloading on both sides.

Sealed Boot Transition
Improves grain flow and increases capacity while protecting the gear boxes from rain and corrosion.

Tapered Boot with Large Clean Out
Maintains maximum capacity when the auger is raised to its highest position. Can be easily opened and cleaned out without tools.

Removable Boot Flight
Removable boot flight with wear edge to improve performance and durability of lower flighting.

New Farmer-Tested Improvements:
•  Increased capacity for better performance at all elevations.
•  Improved low-profile hopper with easy to access drive components and u-joints with external grease zerks.
•  Sealed spout and boot with improved access panels and clean out.
•  Square shaft flighting connections with removable and replaceable boot flight.
•  84', 94', and 114' sizes use steel trussing on the top of the auger for stability and durability.
•  84', 94', and 114' sizes offer extendable axles for stability at the bin site and narrower transport width.
•  Shipped complete with shielded CV-PTO driveline equipped with overload shear bolt(s), dual hydraulic lift cylinders with improved shut-off valve, hopper lift system with 5:1 winch, 16" tires mounted on rims are standard. Also included, hydraulic tractor end couplers.
MKX 130 Swing Hopper with Solid Tires:
•  The 10.5" low profile hopper has all the performance standards you have come to expect from Westfield.
•  Left & Right hand flighting
•  Solid hopper tires
•  U-Joints with external grease points for easy service
•  Hinged chain cover for quick inspection
•  6" one piece rubber extension to prevent grain splashing
Power Swing (Optional):
•  Get the job done faster with Westfield's newly designed Power Swing. Available in 12V Electric or Hydraulic drive.
•  Top wind jack to adjust wheel traction.
•  Large lug tires for positive grip.
•  Two wheel drive design.
•  Easy installation.
Remote 12V Electric Power Swing:
•  Heavy-duty 12 volt motor.
•  Position hopper from cab of truck.
•  Large "easy grip" remote.
•  Secondary control on tube if remote is not available.
Hydraulic Power Swing:
•  Hydraulic drive moves swing hopper.
•  Convenient tube mounted control valve.
•  Complete with hydraulic hoses.

Shown Above with Optional Power Swing
MKX 130 Augers with mechanical drive LOW PROFILE HOPPER
WFMKX130-64 13" x 64' auger 4,449 lbs. $578.37 $21,853
WFMKX130-74 13" x 74' auger 4,747lbs. $617.11 $23,364
WFMKX130-84 13" x 84' auger 6,644 lbs. $863.72 $25,646
WFMKX130-94 13" x 94' auger 7,448lbs. $968.24 $30,037
WFMKX130-114 13" x 114' auger 8,915 lbs. $1,158.95 $38,085
The MKX130 Reducer/Reverser allows higher horsepower tractors to use the 1000 RPM PTO output to operate MKX130 augers at an optimal speed of 540 RPM and maximize the auger capacity. Dual inputs allow auger direction to be easily reversed by switching PTO input connection. Unit mounts conveniently on auger boot. (Not compatible with MK80, MK100 or older MK130 model augers, not compatible with augers equipped with Right Angle Drive).
WFA262 MKX 1000 RPM Reducer/Reverser 294 lbs. $38.22 $3,359
WFA219 CV-PTO 1/2 Shaft For MKX1364 and 74 Models (21 Spline Tractor Output) 30 lbs. $3.90 $910
WFA220 CV-PTO 1/2 Shaft For MKX1364 and 74 Models (20 Spline Tractor Output) 30 lbs. $3.90 $1,001
WFA246 CV-PTO 1/2 Shaft For MKX1384, 94, and 114 Models (21 Spline Tractor Output) 55E 30 lbs. $3.90 $1,416
WFA247 CV-PTO 1/2 Shaft for MKX1384, 94, and 114 Models (20 Spline Tractor Output) 55E 30 lbs. $3.90 $1,433
WFX104 *Credit for MKX130 x 64/74 (PTO Shaft 1/2. Tractor End, Return 18268)(Black) 44 lbs. $5.72 $737
WFX109 *Credit for MKX130 (PTO Shaft 1/2. Tractor End Return 29247)(Yellow)(84/94/114) 27 lbs. $3.51 $1,062
Options For MKX 130 Augers
WFA263 MKX Reverser Kit 46 lbs. $5.98 $861
WFA266 MKX Hydraulic Hopper Lift Kit 93 lbs. $11.96 $1,325
WFA267 MKX Right Angle Drive 220 lbs. $28.60 $3,654
WFX108 *Credit for MKX 130 84/114 CV PTO Yellow (29140 PTO Shaft Return) Less Applicable 71 lbs. $9.23 $1,834
WFA387 MKX 130 Gulp Upgrade 1,965 lbs. $255.45 $15,874
WFX118 *Credit for MKX130 Hopper LIft Arm Assembly lbs.   $650
UPDATED 5/1/2018
  SECTIONS   -    A     B     C     D     E     F     G     H     I     J      -   SECTIONS