Beaver Valley Supply Company - Baumalight Quick Attach Stump Grinder

BAUMALIGHT STUMP GRINDERS

SECTIONS - A B C D E F G H I J - SECTIONS


• Model S18 Stump Grinder • Model S24 Stump Grinder • Model S28 Stump Grinder • Model 3P24 Stump Grinder • Model 3P34 Stump Grinder CLICK ABOVE FOR DETAILS

THIS DATA DUPLICATED FROM THE BAUMALIGHT WEB SITE

TOP OF PAGE

Baumalight Model S18 Stump Grinder

STANDARD FEATURES

The S18 model uses no swing cylinder, flow goes directly to the motor for more torque and has no need for 12 volt DC power. The S18 is mounted at 90 degrees, bring visibility to 100%, and also has a fixed frame so the operator only needs to use controls that he used-to.

• 12-25 gpm
• 24" cutting wheel

CLICK HERE TO SEE STUMP GRINDER VIDEO

CLICK HERE TO SEE OWNERS MANUALS, PARTS
BREAKDOWNS & BROCHURES

ITEM #	DESCRIPTION	WEIGHT	PRICE
WLS18	18" Quick Attach Skid Steer Stump Grinder	642 lbs.	$4,403
WLD001421	Weld On Excavator Adaptor	30 lbs.	$175
WLD001427	Bucket Mount Adaptor	60 lbs.	$360
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB ATWOOD, KS UPDATED 4/1/11

TOP OF PAGE

Baumalight Model S24 Stump Grinder

STANDARD FEATURES

• 20 to 30 gpm (works best from 23 to 30)
• Cutting wheel is powered by the hydraulic remotes on skid steer & swing cylinder is controlled with a 12v diverter valve
• Offset rotor design for greater visibility
• 34 teeth on a 24" wheel means less cutting for each tooth resulting in longer tooth life & smoother cutting for less wear on your skid steer
• Unit is shipped with standard skid steer quick attach, 12v cigarette light plug, and flat-face quick couplers
• Swing cylinder (Less surface disturbance from the tires and better overall control)

CLICK HERE TO SEE STUMP GRINDER VIDEO

CLICK HERE TO SEE OWNERS MANUALS, PARTS
BREAKDOWNS & BROCHURES

ITEM #	DESCRIPTION	WEIGHT	PRICE
WLS24	24" Quick Attach Skid Steer Stump Grinder	850 lbs.	$7,069
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB ATWOOD, KS UPDATED 4/1/11

TOP OF PAGE

Baumalight Model S28 Stump Grinder

STANDARD FEATURES

• 23 to 35 gpm (42 gpm with high flow)
• Cutting wheel is powered by the hydraulic remotes on skid steer & swing cylinder is controlled with a 12v diverter valve
• Offset rotor design for greater visibility
• 34 teeth on a 28" wheel means less cutting for each tooth resulting in longer tooth life & smoother cutting for less wear on your skid steer
• Unit is shipped with standard skid steer quick attach, 12v cigarette light plug, and flat-face quick couplers
• Swing cylinder (Less surface disturbance from the tires adn better overall control)

CLICK HERE TO SEE STUMP GRINDER VIDEO

CLICK HERE TO SEE OWNERS MANUALS, PARTS
BREAKDOWNS & BROCHURES

ITEM #	DESCRIPTION	WEIGHT	PRICE
WLS28	28" Quick Attach Skid Steer Stump Grinder	1,120 lbs.	$11,020
	Control Cable, Price/Ft	lbs.	$20
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB ATWOOD, KS UPDATED 01/01/12

TOP OF PAGE

Baumalight Model 3P24 Stump Grinder

STANDARD FEATURES

• PTO Driven Stump Grinder
• 70" Long - 40" Wide - 880 Lbs.
• 24"X3/4" Rotor With 36 Bolt-in Teeth
• Cutting Wheel Speed 810 RPM
• Hub Torque 803 ft. lbs.
• Slip Clutch to Protect Gearbox

TRACTOR REQUIREMENTS

• Cat. I or II 3pt.
• 30 - 60 HP
• 540 RPM
• 2 - Sets of Remote Hydraulics 5-20 GPM

Model No.	3P24
Rotor Size	24"
Number of Teeth	36
Cutting Teeth Construction	Carbide Steel Bolt-on
Cutting Wheel Speed (rpm)	810
Cutting Height Above Ground	18"
Cutting Depth Below Ground	8"
Max. Cutting Depth per Pass	6"
Max. Horizontal Cut	22"
Swing Arc (degree)	65�
Hub Torque (ft-lbs)	803 ft-lbs
Recommended HP Size	30-60
Hitch	Cat I&II
Hydraulic gpm	5-20
Number of Remotes Required	2
Requires 12 volt DC	no
Input Speed	540
Unit Weight (shipping) lbs	880
Width (shipping)	40"
Length (shipping)	56"

CLICK HERE TO SEE STUMP GRINDER VIDEO

CLICK HERE TO SEE OWNERS MANUALS, PARTS
BREAKDOWNS & BROCHURES

ITEM #	DESCRIPTION	WEIGHT	PRICE
WL3P24	24" PTO Stump Grinder	880 lbs.	$6,705
WLS1050	Valve Kit for tractors with only one set of remotes *MUST BE INSTALLED AT FACTORY*	40 lbs.	$1,020
WLS1000	Replacement Teeth (Without Nut)(Each)		$15
WLS2001	Replacement 5/8 tine lock nut		$3
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB ATWOOD, KS UPDATED 01/01/12

TOP OF PAGE

Baumalight Model 3P34 Stump Grinder

STANDARD FEATURES

• PTO Driven Stump Grinder
• 90" Long - 48" Wide - 1,320 Lbs.
• 34"X3/4" Rotor With 54 Bolt-in Teeth
• Cutting Wheel Speed 810 RPM
• Hub Torque 803 ft. lbs.
• Slip Clutch to Protect Gearbox

TRACTOR REQUIREMENTS

• Cat. II 3pt.
• 45 - 90 HP
• 540 RPM
• 2 - Sets of Remote Hydraulics 5-20 GPM

Model No.	3P34
Rotor Size	34"
Number of Teeth	54
Cutting Teeth Construction	Carbide Steel Bolt-on
Cutting Wheel Speed (rpm)	810
Cutting Height Above Ground	25"
Cutting Depth Below Ground	14"
Max. Cutting Depth per Pass	9"
Max. Horizontal Cut	32"
Swing Arc (degree)	65�
Hub Torque (ft-lbs)	803 ft-lbs
Recommended HP Size	45-90
Hitch	Cat II
Hydraulic gpm	5-20
Number of Remotes Required	2
Requires 12 volt DC	no
Input Speed	540
Unit Weight (shipping) lbs	1320
Width (shipping)	48"
Length (shipping)	78"

CLICK HERE TO SEE STUMP GRINDER VIDEO

CLICK HERE TO SEE OWNERS MANUALS, PARTS
BREAKDOWNS & BROCHURES

ITEM #	DESCRIPTION	WEIGHT	PRICE
WL3P34	34" PTO Stump Grinder	1,320 lbs.	$8,140
WLS1000	Replacement Teeth (Less Nut)(Each)		$15
WLS2001	Replacement 5/8 Tine Lock Nut		$3
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB ATWOOD, KS UPDATED 01/01/12

MANUFACTURER INDEX

PRODUCT INDEX

HOME

SECTIONS - A B C D E F G H I J - SECTIONS