Homepage GANDY
DETHATCHERS / OVERSEEDERS
  MANUFACTURER   INDEX  
  PRODUCT   INDEX  
  HOME  
  BACK  
  SECTIONS   -    A     B     C     D     E     F     G     H     I     J      -   SECTIONS  
Request Postal Mail Brochure  CONTACT  US 
Email Questions or Comments

THIS DATA DUPLICATED FROM THE   GANDY WEB SITE		    •  DETHATCHERS / OVERSEEDERS
•  WALK  BEHIND  OVERSEEDERS
   CLICK  ABOVE  TO  VIEW  DETAILS

 TOP  OF  PAGE 

DETHATCHERS / OVERSEEDERS

red bullet 2-inch seed spacing, 24-outlets seeding 48-inches wide
red bullet 540-rpm PTO driven with slip clutch for tractors 18 h.p. and up
red bullet Self-leveling 3-point hitch
red bullet Cutter blades on 2-inch spacing: sawtooth, heat-treated spring steel design
red bullet Easily turnbuckle to adjust depth
red bullet Pneumatic tires
red bullet Hopper capacity 100-125 lbs.
red bullet Snap-off stainless steel bottom and slide
red bullet Optional trailing 3-section roller, or brush assembly
Overseeder with
Disc Openers


Overseeder with
Shoe Openers
Optional shoe assembly permits more seed to be placed in the slit for increased seed-to-soil contact.
ITEM # DESCRIPTION WEIGHT PRICE
GN2848D12 540-PTO driven dethatcher deck with saw-tooth blades on 2-inch center, pneumatic tires. May be ordered as independent unit. 581 lbs. $5,955
GN2848SS Overseeder hopper attachment for dethatcher deck, seed placement tubes disc openers 315 lbs. $3,574
Dethatcher/Overseeder Options
GN2895 3-Section gang roller option for attachment to overseeder 117 lbs. $894
GN2896 Bearing replacement kit for blade assembly   $186
GN2897 Brush Assembly option for attachment to overseeder 95 lbs. $318
GN28103 Chain drive replacement package, will adapt to belt driven units 13 lbs. $462
GN2894-C Shoe assembly as an extra for 2848SS equipped unit 114 lbs. $1,896
GN2894-D Disc Blade assembly with bearings for 2848SS equiped unit   $1,070
GN2893-C Saw-tooth blade assembly complete with blades, spacers, shaft, bearings, sprockets, adn castellated nuts. 114 lbs. $1,041
GN2893-49 Blade, 8" Saw-tooth, 30 degree, 14-gauge 1 lb. $25
GN2893-50 Blade, 8" Saw-tooth, 90 degree, 14-gauge 1 lb. $25
GN2893-51 Blade, 9 " saw-tooth, 30 degree, 14-gauge 1.5 lbs. $28
GN2893-52 Blade, 9" saw-tooth, 90 degree, 14-gauge 1.5 lbs. $28
GNM13-0024-000 Single brush replacement for brush assembly (white) 4 lbs. $36
GNG07-0020-000 PTO drive shaft, with slip clutch, standard replacement part   $467
GNG07-0020-001 PTO drive shaft, adjustable friction slip clutch   $597
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB FACTORY
UPDATED 1/19/12


 TOP  OF  PAGE 

WALK  BEHIND  OVERSEEDERS

Repair turn areas quickly with easy-use design.
  • POWER
  • Engine: Honda 4-cycle, recoil starter
  • Horsepower: 8 hp, 2:1 reduction centrifugal clutch

  • UNIT
  • Drive: Primary 6822 V-belt to 31:1 reduction gear box, roller chain to drive wheels; two 6934 V-belts to blade reel
  • Capacity: Operational up to 22,000 sq. ft. per hr.; Travel up to 220 ft. per min. (2.53 mph)
  • Depth adjustment: Adjustable for depth with finger-tip screw.
  • Seeding width: 20-inches
  • Blades: 10 heat-treated, high-carbon steel
  • Tires: Front drive, 11 x 4.00 x 5 turf tread;
  • Rear drive, 4:10 x 3/50 x 4 saw-tooth tread
  • DIMENSIONS
  • Total weight: 400 lbs.
  • Width: 36 inches
  • Length: 35 inches
  • Height: 43 inches
  • HOPPER
  • Capacity: 0.83 cu ft (0.02 m3)
  • Hopper Size:
  • Height: 13 inches (33 cm)
  • Width: 8.5 inches (22 cm)
  • Length: 18.5 inches (47 cm)
  • Seeds: Most types of grass seed
  • METERING SYSTEM
  • Metering system: Stainless steel bottom & slide with triangular holes adjusted in size by cam gauge.
  • Rotor bar: Internal 5-bladed neoprene rubber
  • Number of outlets: 10
  • Seed flow control: Rotor bar restricts flow when stopped; slide shuts off flow positively.
  • Rotor bar drive: V-belt drive powered from front-wheel drive unit
  • Slide: Manual lever for on/off
  • Maintenance: Rotor bar and metering bottom easily removed for servicing

  • SEED PLACEMENT SYSTEM
  • Seed tubes: Clear plastic with non-collapsible wire reinforcement
  • Spacing between seed outlets: 2-inches (5 cm)
  • Disk assembly: 7" (17.78 cm) steel discs with spring-loaded scrapers.
  • Shoe injector option: 10 high-carbon, heat-treated shes, spaced on 2-inch (5 cm) centers
  • Slicing blades: Ten 9" heat-treated anneal spring steel blades; saw-tooth designed for slicing; spaced on 2-inch (5 cm) centers on 1-inch (2.5 cm) hex shaft in offset alignment.
ITEM # DESCRIPTION WEIGHT PRICE
GN2820SS 20" Overseeder with disc assembly 573 lbs. $7,083
GN2820-B Disc assembly as an extra for 2820SA equipped unit   $1,048
GN2893-51 Blade, 9" saw-tooth, 30 degree, 14-gauge 1.5 lbs. $28
GN2893-52 Blade, 9" saw-tooth, 90 degree, 14-gauge 1.5 lbs. $28
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB FACTORY
UPDATED 1/19/12

  MANUFACTURER   INDEX  
  PRODUCT   INDEX  
  HOME  
  SECTIONS   -    A     B     C     D     E     F     G     H     I     J      -   SECTIONS