| THE NEW H & S HEAVY DUTY X-SERIES RAKE |
 |
The H&S HDX Series rakes feature a highly maneuverable short turning radius, no caster
wheel design, and an overhead frame design for high volume capacity crop.
|
| Key Features: |
 |
The H&S HDX Series Rake
The H&S HDX Series Rake (X14 Shown at left) |
 |
Turnbuckle Adjustment
Two turnbuckle adjustments (B) on the support rods of each rake
beam adjust to keep the rake beam level. |
 |
Rake Wheel Ground Pressure
Each rake beam adjustment (A) for the rake wheel ground pressure
allowing the operator to fine tune for various conditions. |
 |
Adjust Beam Angle
A five position manual adjust beam angle is standard equipment. |
 |
Proven Ground Pressure System
Like all H&S Rakes, the HDX Series Rakes have a proven ground
pressure system and rake arm design. The X-19 Rake has 100% coverage, there is no need for center kicker wheels. The 3 wheel extension
can be locked up if needed. All models of the HDX Series Rakes also feature one side raking with either side. |
 |
Width and Height Adjustment
The variable main framme width adjustment opens symmetrically. Hitch
height and beam fore and aft tilt are easily controlled by a rachet jack (C). |
 |
Tandem Tires and Beam Angle Kit
Tandem 6.70 x 15 Tires w/rims (D) are standard equipment. The
optional hydraulic beam angle kit (E) adjusts right and left beam angles. |
 |
Toggle Switch
Toggle switch up adjusts left beam angle.
Toggle switch neutral adjusts main frame width.
Toggle switch down adjusts right beam angle. |
 |
Rake Wheel Winds Boards
Optional rake wheel wind boards help to keep the crop from wrapping
on the rake wheels. |
 |
HDX-Rake Configurations
HDX-2: 2 Wheel Front Extension
HDX-3: 3 Wheel Right Rear Extension
HDX-14: 14 Wheel V-Style Rake
HDX-16: 16 Wheel V-Style Rake
HDX-17: 17 Wheel Y-Style Rake
HDX-19: 19 Wheel Y-Style Rake |
| SPECIFICATIONS |
| Model |
HDX14 |
HDX16 |
HDX17 |
HDX19 |
| Wheel Diameter |
60" |
| Tooth Diameter |
7.5 mm (.275") |
| Transport Length |
26'5" |
29'4" |
34'8" |
37'7" |
| Raking Width |
Up to 31' |
Up to 34'6" |
Up to 31' |
Up to 34'6" |
| Hitch Jack |
Standard |
Standard |
Standard |
Standard |
| Weight |
4,140 lbs. |
4,400 lbs |
4,540 lbs. |
4,800 lbs. |
| Transport/Work Lights |
Optional |
| Electrical Requirements |
Plus 12 volt power source if rake is equipped with the hydraulic beam angle kit |
| Teeth Per Wheel |
40 |
| Transport Width |
12'5" |
| Windrow Width Adjustment |
Up to 94" |
| Raking Wheel Hubs |
Tapered Roller Bearings |
| Standard Transport Wheels |
(4-Tandem) 6.70 x 15 |
| Rake Wheel Wind Guards |
Optional |
| Hydraulic Requirements |
1 Double Acting Remote Remote for Main Frame Open and Close
1 Single Acting Remote For Rake Wheel Lift |
|
|
