Homepage BISON
REAR TRACTOR BLADES
  MANUFACTURER   INDEX  
  PRODUCT   INDEX  
  HOME  
  BACK  
  SECTIONS   -    A     B     C     D     E     F     G     H     I     J      -   SECTIONS  
Request Postal Mail Brochure  CONTACT  US 
Email Questions or Comments

THIS DATA DUPLICATED FROM THE
BISON  WEB SITE 		•  F Series
•  T/LT Series
•  NVH Series
•  NVH-XHD Series
•  NHVH-XHD Series
•  NVHL Series

     CLICK  ABOVE  FOR  DETAILS

 TOP  OF  PAGE 

F Series
•  Ideal For light road maintenance, lawn care, gardening, and other light-duty landscaping applications

•  Blades can be used year-around for leveling ground, roadside clearing, and snow removal

•  Offset, angle, and tilt options come standard on all models.


SPECIFICATIONS
NVHF-152
NVHF-182
Moldboard width
(ft)
5
6
Approximate weight
(lbs)
250
280
King pin diameter
(in)
-
Moldboard height & thickness
(in)
12 1/2 " x 1/4"
Cutting edge
-
1/2" x 6" high carbon-steel blade,
reversible, interchangeable
Maximum tractor hp
(hp)
45
Hitch
-
3-point category I
Swing angle
-
20º,40º and 60º left or right,
3 forward and 3 reverse positions
Offset adjustment
(in)
0 to 12 left or right

Tilt adjustment
-
0º to 20º up or down
Total swing angle
( º )
360
Parking stand  
-
Standard
Click Here For Brochure
Click Here Assembly Instructions
MODEL DESCRIPTION WEIGHT PRICE
BINVHF-152 5' 3-pt Blade w/angle, offset and tilt, w/1/2 x 6" Cutting Edge 250 lbs. $595
BINVHF-182 6' 3-pt Blade w/angle, offset and tilt, w/1/2 x 6" Cutting Edge 280 lbs. $634
BINVHF-212 7' 3-pt Blade w/angle, offset and tilt, w/1/2 x 6" Cutting Edge 320 lbs. $670
OPTIONS
BIC6100004 Skid Shoes (Per Pair)   $60
PRICES DO NOT INCLUDE SHIPPING OR SETUP - PRICED F.O.B. ATWOOD, KS
UPDATED 6/6/08


 TOP  OF  PAGE 

T/LT Series
•  Ideal for light road maintenance, lawn care, gardening, and other light-duty landscaping applications.

•  Blades can be used year-around for leveling ground, roadside clearing, and snow removal.

•  Offset, angle, and tilt options come standard on all models.

Attachments:
End Plates Skid Shoes


SPECIFICATIONS
 NVH-180-T (LT)
NVH-210-T
NVH-240-T
Moldboard width
(ft)
6
7
8
Approximate weight
(lbs)
423 (372)
447
476
King pin diameter
(in)
2 5/8
Moldboard height & thickness
(in)
15 1/2 " x 1/4"
Cutting edge
-
1/2" x 6" high carbon-steel blade (3/8" x 4" spring steel blade), reversible, interchangeable
Maximum tractor hp
(hp)
65
Hitch
-
3-point category I
Swing angle
-
18º, 35º and 53º, left or right, 3 forward and 3 reverse positions
Offset adjustment
(in)
6 or 12 left or right

Tilt adjustment
-
7.5º, 15º, 22.5º, and 30º up or down
Total swing angle
( º )
Parking stand
-
Standard
Click Here For Brochure
Click Here Assembly Instructions
MODEL DESCRIPTION WEIGHT PRICE
BINVH-180-T 6' 3-pt Blade w/manual angle, offset and tilt,w/1/2 x 6" cutting edge 423 lbs. $863
BINVH-210-T 7' 3-pt Blade w/manual angle, offset and tilt,w/1/2 x 6" cutting edge 447 lbs. $907
BINVH-240-T 8' 3-pt Blade w/manual angle, offset and tilt,w/1/2 x 6" cutting edge 476 lbs. $958
OPTIONS
BIC6100001 Skid Shoes (Per Pair) 12 lbs. $105
BIC6200001 End Plates (Per Pair)   $105
PRICES DO NOT INCLUDE SHIPPING OR SETUP - PRICED F.O.B. ATWOOD, KS
UPDATED 6/6/08


 TOP  OF  PAGE 

NVH Series
•  Cut and roll the soil rather than dragging. Save time, horsepower, and fuel

•  All rear blades tilt, offset, and angle.

    •  Tilt the moldboard up or down 22º

    •  Offset adjustment allows 18” left or right (manual or hydraulic).

    •  Total swing angle of 360º

Attachments:
End Plates Skid Shoes


SPECIFICATIONS
NVH-210
NVH-240
NVH-270
Moldboard width
(ft)
7
8
9
Approximate weight
(lbs)
756
773
789
King pin diameter
(in)
Moldboard height & thickness
(in)
18" x 1/4"
Cutting edge
-
1/2" x 6" high carbon-steel blade, reversible, interchangeable
Maximum tractor hp
(hp)
65
80
Hitch
-
3 - point category II, II Quick Hitch
Swing angle
-
15º, 30º and 45º, left or right, 3 forward and 3 reverse positions
Offset adjustment
(in)
9 or 18 left or right (manual or hydraulic)1

Tilt adjustment
-
7.5º, 15º, 22.5º up or down
Total swing angle
( º )
360
Parking stand
-
Standard
Click Here For Brochure
Click Here Assembly Instructions
MODEL DESCRIPTION WEIGHT PRICE
BINVH-210 7' 3-pt Blade w/manual angle, offset and tilt, w/1/2 x 6" cutting edge 756 lbs. $1,496
BINVH-240 8' 3-pt Blade w/manual angle, offset and tilt, w/1/2 x 6" cutting edge 773 lbs. $1,585
BINVH-270 9' 3-pt Blade w/manual angle, offset and tilt, w/1/2 x 6" cutting edge 789 lbs. $1,661
OPTIONS
BIC6200003 End Plates (Per Pair)   $101
BIC6100002 Skid Shoes (Per Pair) 12 lbs. $107
CR308DU 3" x 8" Cross Cylinder For Hydraulic Offset Only 25 lbs. $107.50
CR8-1/2 8' 1/2" Hydraulic hose w/male pipe both ends   $21
PRICES DO NOT INCLUDE SHIPPING OR SETUP - PRICED F.O.B. ATWOOD, KS
UPDATED 6/6/08


 TOP  OF  PAGE 

NVH-XHD
•  Up to 120 hp tractors.

•  For a wide range of material handling work... from landscaping to heavy duty dam-building jobs.

•  An important factor in the performance of the rear blade is the precision-formed moldboard with the exact curvature necessary to achieve maximum penetration. This added precision allows rear blades to cut and roll the soil rather than dragging, which saves time, horsepower, and fuel.

Attachments:
End Plates Skid Shoes


SPECIFICATIONS
NVH-240-XHD
NVH-270-XHD
NVH-300-XHD
Moldboard width
(ft)
8
9
10
Approximate weight
(lbs)
926
1020
1069
King pin diameter
(in)
3
Moldboard height & thickness
(in)
18" x 5/16"
Cutting edge
-
1/2" x 6" high carbon-steel blade, reversible, interchangeable
Maximum tractor hp
(hp)
120
Hitch
-
3 - point category II, II Quick Hitch
Swing angle
-
15º, 30º and 45º, left or right, 3 forward and 3 reverse positions
Offset adjustment
(in)
9 or 18 left or right, (manual or hydraulic)1

Tilt adjustment
-
7.5º, 15º and 22.5º up or down
Total swing angle
( º )
360
Parking stand
-
Standard
Click Here For Brochure
Click Here Assembly Instructions
MODEL DESCRIPTION WEIGHT PRICE
BINVH-240-XHD 8' 3-pt Blade w/manual angle, offset and tilt,w/1/2 x 6" cutting edge 926 lbs. $1,905
BINVH-270-XHD 9' 3-pt Blade w/manual angle, offset and tilt,w/1/2 x 6" cutting edge 1,020 lbs. $2,016
BINVH-300-XHD 10' 3-pt Blade w/manual angle, offset and tilt,w/1/2 x 6" cutting edge 1,069 lbs. $2,091
OPTIONS
BIC6200003 End Plates (Per Pair)   $101
BIC6100002 Skid Shoes (Per Pair) 12 lbs. $107
CR308DU 3" x 8" Cross Cylinder For Hydraulic Offset Only 25 lbs. $107.50
CR8-1/2 8' 1/2" Hydraulic hose w/male pipe both ends   $21
PRICES DO NOT INCLUDE SHIPPING OR SETUP - PRICED F.O.B. ATWOOD, KS
UPDATED 6/6/08


 TOP  OF  PAGE 

NHVH-XHD
•  Up to 120 hp tractors.

•  For a wide range of material handling work... from landscaping to heavy duty dam-building jobs.

•  An important factor in the performance of the rear blade is the precision-formed moldboard with the exact curvature necessary to achieve maximum penetration. This added precision allows rear blades to cut and roll the soil rather than dragging, which saves time, horsepower, and fuel.

•  NHVH models offer even more, such as fully hydraulic (or manual) angle, tilt, and offset movements.

•  When blade is angled 45 degrees to the right, cylinder is on left side. When blade is angled 45 degrees to the left, cylinder is on the right side.
* * * Note: Angle cylinder must be manually moved to the other side of main frame to obatain full angle capability.* * *

Attachments:
End Plates Skid Shoes


SPECIFICATIONS
NHVH-212-XHD
NHVH-242-XHD
NHVH-272-XHD
NHVH-302-XHD
Moldboard width
(ft)
7
8
9
10
Approximate weight
(lbs)
1057
1139
1240
1300
King pin diameter
(in)
3
Moldboard height & thickness
(in)
18" x 5/16"
Cutting edge
-
1/2" x 6" high carbon-steel blade, reversible, interchangeable
Maximum tractor hp
(hp)
120
Hitch
-
3 - point category II, II Quick Hitch
Swing angle
-
0º to 45º left or right, forward or reverse positions (hydraulic)1,3
* * * Note: Angle cylinder must be manually moved to the other side of main frame to obatain full angle capability.* * *
Offset adjustment
(in)
0 to 18 left or right (hydraulic)1,3

Tilt adjustment
-
0º to 15º up or down (hydraulic)2,3
Total swing angle
( º )
360
Parking stand
-
Standard
Click Here For Brochure
Click Here Assembly Instructions
MODEL DESCRIPTION WEIGHT PRICE
* * * Note: Angle cylinder must be manually moved to the other side of main frame to obatain full angle capability.* * *
BINHVH-212-XHD 7' All Hydraulic Blade less cylinder uses std 3 x 8 hyd cylinder (not included), Cat. II, 3 Pt. 1,057 lbs. $2,044
BINHVH-242-XHD 8' All Hydraulic Blade less cylinder uses std 3 x 8 hyd cylinder (not included) 1,139 lbs. $2,138
BINHVH-272-XHD 9' All Hydraulic Blade less cylinder uses std 3 x 8 hyd cylinder (not included) 1,240 lbs. $2,263
BINHVH-302-XHD 10' All Hydraulic Blade less cylinder uses std 3 x 8 hyd cylinder (not included) 1,300 lbs. $2,327
OPTIONS
BIC6200003 End Plates (Per Pair)   $101
BIC6100002 Skid Shoes (Per Pair) 12 lbs. $107
CR308DU 3" x 8" Cross Hydraulic Cylinder 25 lbs. $107.50
CR8-1/2 8' x 1/2" Hydraulic Hose w/Male Pipe both ends
*Note: (2) Needed for Hyd. Offset*		 Each $21
CR12-1/2 12' 1/2" Hydraulic Hose w/ Male Pipe both ends
*Note: (2) Each Needed for Hyd. Angle & Hyd. Tilt*		 Each $28.25
PRICES DO NOT INCLUDE SHIPPING OR SETUP - PRICED F.O.B. ATWOOD, KS
UPDATED 6/8/08


 TOP  OF  PAGE 

NVHL Series
•  Up to 150 hp tractors. Big blades ranging in moldboard widths from 8 to 10 feet.

•  Rugged construction & outstanding performance.

•  Superior craftsmanship and innovative designs. Our extra long boom allows full angling of moldboard without the chance of damaging tractor tires.

•  Ditching and terracing jobs can be accomplished quickly and easily with optional hydraulic tilt adjustment.

•  360º Total swing angle. The 1/2” x 6” grader-type steel cutting edge is reversible, featuring bevels on both edges for twice the work life, and replaceable for even greater functionality.

Attachments:
Single/Dual Tailwheel End Plates Skid Shoes


SPECIFICATIONS
NVHL-240-XHD
NVHL-270-XHD
NVHL-300-XHD
Moldboard width
(ft)
8
9
10
Approximate Weight Less Hyd. Kits
(lbs)
1333
1381
1432
King pin diameter
(in)
4
Moldboard height & thickness
(in)
19" x 5/16" (with full box frame)
Cutting edge
-
1/2" x 6" high carbon-steel blade, reversible, interchangeable
Maximum tractor hp
(hp)
150
Hitch
-
3-point category II, III, and III quick hitch
Swing angle
-
0º to 45º left or right (manual or hydraulic)1
Offset adjustment
(in)
0 to 32 3/8 left or right (manual or hydraulic)2

Tilt adjustment
-
0º to 12º up or dow(manual or hydraulic)3
Total swing angle
( º )
360
Parking stand
-
Standard
Click Here For Brochure
Click Here Assembly Instructions
MODEL DESCRIPTION WEIGHT PRICE
BINVHL-300-XHD 10' 3-pt Rear Blade c/w angle - tilt and offset control fits category II & III and quick hitch, for tractors 90-150 HP drawbar ratings, 3 1/2" king pin bottom, 4" king pin top, 1/2 x 6 cutting edge top punched, swing 32" right or left, moldboard completely reinforced 1,432 lbs. $3,418
BINVHL-270-XHD 9' 3-pt Rear Blade - Same as Above 1,381 lbs. $3,343
BINVHL-240-XHD 8' 3-pt Rear Blade - Same as Above 1,333 lbs. $3,256
OPTIONS
LE1301125 Hydraulic Angle Cylinder Kit - includes 4" dia. x 16" stroke, 2" shaft with 2-8' NPT hydraulic hoses 60 lbs. $410
LE1390117 Hydraulic Offset Cylinder Kit - includes 4" dia. x 16" stroke, 2" shaft with 2-8' NPT hydraulic hoses 60 lbs. $410
LE1390118 Hydraulic Tilt Cylinder Kit - includes 3 1/2" dia. x 4 1/4 stroke, 1 1/2 shaft with 2-12' NPT hydraulic hoses 40 lbs. $310
BIC6100003 Skid Shoes (Per Pair) 13 lbs. $60
BIC6200004 End Plates (Per Pair) 62 lbs. $115
BIC6400031 Mechanical Linkage {Offset}   $33
BIC6400032 Mechanical Linkage {Angle}   $33
BIC6400033 Mechanical Linkage {Tilt}   $33
BIC6600001 Tailwheel for NVHL Series (single gauge wheel)   $500
BIC6600002 Tailwheel for NVHL series (dual gauge wheel)   $744
BIC6600031 Mechanical linkage for tailwheel NVHL series   $83
BIC6600041 3X8 Hyd. Kit for Tailwheel NVHL series   $382
PRICES DO NOT INCLUDE SHIPPING OR SETUP - PRICED F.O.B. ATWOOD, KS
UPDATED 6/6/08

  MANUFACTURER   INDEX  
  PRODUCT   INDEX  
  HOME  
  SECTIONS   -    A     B     C     D     E     F     G     H     I     J      -   SECTIONS