|
Beaver Valley Standard-Duty Rotary Cutters |
 |
The new Beaver Valley Rotary Cutter offers "extreme" features, making it the most relentless rotary cutter
on the market. Designed for some of the toughest applications you’ll encounter, this BrushBull will impress you with incredibly
reliable performance. And with the Beaver Valley name behind it, you know you’re going to get a great product with unmatched
service and support.
The Beaver Valley Rotary Cutter offers the discerning buyer many great features not found on other similar rotary cutters. The frame
includes a 3-piece deck plate welded to two 3" x 4" structural beams running the length of the deck, plus a 2" tube used as a rear
bumper. Our tail wheel is mounted at four points verses competitive units that only mount at 3 or even only 2 points. This gives
us more strength and longevity, especially from side pressure during turning. Our quick change blade pin system and large
access window on the deck top allows for easy blade changes without the need to get under the cutter. And our gearboxes
are supported by an industry leading 6 year warranty.
These and many other features make the Beaver Valley Rotary Cutter rugged, dependable, and productive to meet the
extremes of the real world. |
Features:
• 5, 6, and 7 foot cutting widths available; for tractors between 15 and
90 horsepower, depending on cutter size (see specs)
• Deep deck handles more material in heavy growth areas (9.4" side depth on 4 & 5 foot, 9.5" on 6 & 7 foot models)
• Cutting capacity of 1.5 inch diameter material; 2 inch material on BB84X
• 3" x 4" structural steel tubular beams (above) extend the full length of the deck and through
the top plate for greatly increased structural integrity
• 2" round tubular rear bumper (below) for added frame strength
• Large access window on top of deck and exclusive quick-change blade pin system (above)
allow easy blade changes from the top, without the need to lift the deck and work from underneath
• 4-point mounted tail wheel (below) absorbs shock and stress better than other brands
that offer only 2 or 3 point mountings - laminated tire standard
• New heavy-duty clevis hitch points (above) add strength
• Newly improved floating hitch design
• Quick hitch compatible
• Tip speeds to 15,000 FPM ensure a high quality of cut
• Shear pin or slip clutch shock protection available on BB48X and BB60X, with slip
clutch protection standard on the BB72X and BB84X
• Rear metal and front rubber deflector shields standard
• Front and rear chain shielding optional
• Wide, full-length skid shoes
• Gearboxes feature heat-treated alloy steel gears running on tapered roller bearings
• Industry leading 6 year gearbox warranty
|
| Model |
BB48X |
BB60X |
BB72X |
BB84X |
| Cutting width |
48 inches |
60 inches |
72 inches |
84 inches |
| Transport width |
51.5 inches |
63.5 inches |
75.5 inches |
87.5 inches |
| Overall length |
92 inches |
104 inches |
116 inches |
128 inches |
| Deck length |
58 inches |
70 inches |
84 inches |
96 inches |
| Cutting height range |
1 - 9 inches |
1 - 9 inches |
1 - 9 inches |
1 - 9 inches |
| Approximate weight |
506 lbs. |
604 lbs. |
800 lbs. |
1076 lbs. |
| Tractor HP |
15 - 50 |
25 - 50 |
30 - 65 |
35 - 90 |
| Tractor PTO speed |
540 RPM |
540 RPM |
540 RPM |
540 RPM |
| Hitch |
Category 1/Clevis |
Category 1/Clevis |
Category 1/Clevis |
Category 1/Clevis |
| Quick Hitch Compatible |
Yes |
Yes |
Yes |
Yes |
| Safety Shielded Driveline |
Category 3 |
Category 3 |
Category 3 |
Category 4 |
| Driveline protection |
shear pin or slip clutch |
shear pin or slip clutch |
slip clutch |
slip clutch |
| Gearbox output shaft diameter |
1.57 inches |
1.57 inches |
1.57 inches |
1.57 inches |
| Gearbox horsepower |
65 |
65 |
75 |
90 |
| Blades (thickness x width) |
(2) 3/8 x 3 inches |
(2) 3/8 x 3 inches |
(2) 1/2 x 3 inches |
(2) 1/2 x 3 inches |
| Blade Composition |
heat-treated alloy steel |
heat-treated alloy steel |
heat-treated alloy steel |
heat-treated alloy steel |
| Blade Carrier |
oval stump jumper |
oval stump jumper |
oval stump jumper |
oval stump jumper |
| Blade mount system/pin diameter |
quick-change blade pins/1.5 inch |
quick-change blade pins/1.5 inch |
quick-change blade pins/1.5 inch |
quick-change blade pins/1.5 inch |
| Number of spindles |
1 |
1 |
1 |
1 |
| Blade speed |
914 RPM |
914 RPM |
792 RPM |
792 RPM |
| Blade tip speed |
13,000 FPM |
14,355 FPM |
14,963 FPM |
15,086 FPM |
| Blade rotation |
CCW |
CCW |
CCW |
CCW |
| Deck side depth |
9.4 inches |
9.4 inches |
9.5 inches |
9.5 inches |
| Tail wheel - laminated tire |
4 X 16 inches |
4 X 16 inches |
4 X 16 inches |
4 X 16 inches |
| Tail wheel mount |
4-point |
4-point |
4-point |
4-point |
| Frame & deck support |
3" x 4" full length structural beams |
3" x 4" full length structural beams |
3" x 4" full length structural beams |
3" x 4" full length structural beams |
| Rear bumper |
2" tubular |
2" tubular |
2" tubular |
2" tubular |
| Cutter deck thickness |
12 gauge |
12 gauge |
11 gauge |
11 gauge |
| Side skirt thickness |
11 gauge |
11 gauge |
11 gauge |
10 gauge |
| Cutting Capacity |
1.5-inch |
1.5-inch |
1.5-inch |
2-inch |
|
|
 |
|
|
