Beaver Valley Supply Company - Danuser EP Series Drive Units

DANUSER EP Series Drive Units

MANUFACTURER INDEX

PRODUCT INDEX

HOME

BACK

SECTIONS - A B C D E F G H I J - SECTIONS

•  EP Series Drive Units
•  Mount Options
•  Hoses & Couplers
•  Danuser Industrial Augers
•  Danuser Wobble Augers
THIS DATA DUPLICATED
FROM THE
DANUSER    WEB SITE

Danuser EP Series Drive Units

Economy Planetary Drive Unit Features:
•  Lifetime warranty against output pull out (no snap rings)
•  One-piece forged output and carrier assembly (no internal spline connection to fail)
•  One-piece forged steel output housing (no casting to break)
•  Utility-style housing with integrated ears makes it extremely strong
•  Gearbox oil check and fill plugs are easily located (no disassembly required)
•  No case drain required
•  Extremely low maintenance
•  Tapered roller bearings
•  All rotating parts are completely sealed and running in oil
•  Heavy-duty, high strength 1-1/4" knuckle pins zinc plated to resist rust
•  Robotically-welded housing
•  Extremely tough powder coated housing
•  Lifetime warranty covering output pull out!
•  3 Year Warranty on drive unit
•  2" Hex Output

Model EP6
Maximum Auger Diameter	24"
Hydraulic Flow	6-15 GPM
Maximum Hydraulic Pressure	3,000 PSI
Gear Box Ratio	3.86:1
Speed
GPM	RPM
6	36
8	48
10	60
12	73
14	85
15	91
TORQUE
PSI	Ft.-Lbs.
2000	1014
2500	1267
3000	1520

Model EP10
Maximum Auger Diameter	30"
Hydraulic Flow	10-20 GPM
Maximum Hydraulic Pressure	3000 PSI
Gear Box Ratio	3.86:1
Speed
GPM	RPM
10	48
12	58
14	68
16	77
18	87
20	97
TORQUE
PSI	Ft.-Lbs.
2000	1270
2500	1587
3000	1904

Model EP15
Maximum Auger Diameter	36"
Hydraulic Flow	15-30 GPM
Maximum Hydraulic Pressure	3000 PSI
Gear Box Ratio	3.86:1
Speed
GPM	RPM
15	49
18	59
20	65
24	78
28	92
30	98
TORQUE
PSI	Ft.-Lbs.
2000	1874
2500	2342
3000	2811

MODEL	DESCRIPTION	WEIGHT	PRICE
DA10180	Model EP6	138 lbs.	$1,325
DA10181	Model EP10	139 lbs.	$1,425
DA10182	Model EP15	140 lbs.	$1,495
Note: To make a complete unit must include: 1. Drive Unit, 2. Mount, 3. Hose Kit, 4. Auger
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB FACTORY UPDATED 6/7/11

Mount Options



	SKID-STEER QUICK ATTACH
	Mounting Kit (includes Knuckle and Cradle) attaches Drive Unit to skid-steers with 2-pin system and SAE Standard quick couplers.
		PART NUMBER
	For EP Series: EP6, EP10, & EP15	10488
	Approx. Ship Weight (lbs)	150

TLB (BACKHOE) & EXCAVATOR
Less dipperstick pin. For dipperstick widths up to 13". Bucket pin diameters listed below.
BUCKET PIN DIAMETER	WEIGHT (lbs.)	PART NUMBER
1-5/8 inch	50	10296
1-3/4 inch	50	10231
50 mm	50	10232
55 mm	50	10233



SMALLER BACKHOE & MINI-EXCAVATOR
Up to 40 HP. Less dipperstick pin. For dipperstick widths from 3-1/2" to 8". Bucket pin diameters listed below.
BUCKET PIN DIAMETER	WEIGHT (lbs.)	PART NUMBER
25 mm	42	10201
1 inch	42	10201
30 mm	42	10202
1-1/4 inch	42	10203
1-3/8 inch	42	10204
35 mm	42	10204
1-1/2 inch	42	10205
40 mm	42	10206
1-5/8 inch	42	10298
1-3/4 inch	46	10207
45 mm	46	10208
50 mm	46	10209



BOLT-ON BUCKET
Mounting Kit (includes Knuckle) will mount on vertical surface. Kit does not include bucket mounting hardware. (4 Bolts 1/2" Diameter, Grade 5 or greater, 4 lock washers, and 4 nuts)
	WEIGHT (lbs.)	PART NUMBER
	40	10489

MODEL	DESCRIPTION	WEIGHT	PRICE
Skid-Steer Quick Attach
DA10488	Mounting Kit (includes Knuckle and Cradle) attaches Drive Unit to skid-steers with a 2-pin system For EP Series: EP6, EP10,EP15	150 lbs.	$385
MODEL	BUCKET PIN DIAM.	WEIGHT	PRICE
TLB (Backhoe) & Excavator Less dipperstick pin, for dipperstick width up to 13", bucket pin diameters listed below
DA10296	1-5/8 Inch	49 lbs.	$388
DA10231	1-3/4 Inch	50 lbs.	$388
DA10232	50 mm	50 lbs.	$388
DA10233	55 mm	50 lbs.	$388
Smaller Backhoe & Mini-Excavator Less dipperstick pin, for dipperstick widths from 3-1/2" to 8". Bucket pin diameters listed below.
DA10201mm	25 mm	42 lbs.	$257
DA10201in	1 inch	42 lbs.	$257
DA10202	30 mm	42 lbs.	$257
DA10203	1-1/4 inch	42 lbs.	$257
DA10204mm	35 mm	42 lbs.	$257
DA10204in	1-3/8 inch	42 lbs.	$257
DA10205	1-1/2 inch	42 lbs.	$257
DA10206	40 mm	42 lbs.	$257
DA10207	1-3/4 inch	46 lbs.	$257
DA10208	45 mm	46 lbs.	$257
DA10209	50 mm	46 lbs.	$257
DA10210	2 inch	46 lbs.	$257
Quick-Attach Mounting Kits
DA10172	For Cat 42D & 420E	75 lbs.	$668
DA10173	For JCB 208S, 803, & 8018	40 lbs.	$555
DA10174	For JD 790ELC	172 lbs.	$1,036
DA10175	For JD 135C RTS	82 lbs.	$639
DA10176	For Yanmar VIO27 & VIO35 (quick coupler)	45 lbs.	$552
DA10177	For Yanmar VIO40, VIO45, VIO55, & VIO50 (quick coupler)	50 lbs.	$562
Bolt-On Bucket
DA10489	Mounting kit (includes knuckle) will mount on vertical surface. Kit does not include bucket mounting hardware	40 lbs.	$260
Note: To make a complete unit must include: 1. Drive Unit, 2. Mount, 3. Hose Kit, 4. Auger
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB FACTORY UPDATED 6/7/11

Hoses & Couplers


HOSES
Hoses are 96" long with abrasion sleeves. 3/4" hoses REQUIRED for 20 GPM to 45 GPM.
DESCRIPTION	WEIGHT (lbs.)	PART NUMBER
1/2" HOSE KIT with flat face ISO couplers	14	10050
3/4" HOSE KIT with flat face ISO couplers	19	10051
Note: Couplers will not fit Case 1835C, 1838, 1840, & 1845C Skid-Steers.
1/2" HOSE KIT (includes fittings NOT couplers)	9	10043
3/4" HOSE KIT (includes fittings NOT couplers)	14	10044

MODEL	DESCRIPTION	WEIGHT	PRICE
DA10047	Cross Port Relief Valve (req'd for pressures exceeding 3000 PSI)	lbs.	$345
Hoses With Flat Face ISO Couplers
DA10050	1/2" Diameter	14 lbs.	$203
DA10051	3/4" Diameter	19 lbs.	$281
DA10171	3/4" Diameter For Models 2545H & 3060H, Not to Exceed 45 GPM	19 lbs.	$281
Hoses With Fittings Not Couplers
DA10043	1/2" Diameter	9 lbs.	$135
DA10044	3/4" Diameter	14 lbs.	$213
Flat Face Couplers
DA10048	Male Hydraulic Coupler 1/2" 'O' Ring	lbs.	$36
DA10049	Female Hydraulic Coupler 1/2" 'O' Ring	lbs.	$58
Note: To make a complete unit must include: 1. Drive Unit, 2. Mount, 3. Hose Kit, 4. Auger
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB FACTORY UPDATED 6/7/11

MANUFACTURER INDEX

PRODUCT INDEX

HOME

SECTIONS - A B C D E F G H I J - SECTIONS