Homepage KINGHITTER
POST DRIVERS
  MANUFACTURER   INDEX  
  PRODUCT   INDEX  
  HOME  
  BACK  
  SECTIONS   -    A     B     C     D     E     F     G     H     I     J      -   SECTIONS  
Request Postal Mail Brochure  CONTACT  US 
Email Questions or Comments


THIS  DATA  DUPLICATED  FROM  THE
KINGHITTER    WEB  SITE
            •  SERIES I - RANCHER
    •  SERIES II - DELUXE
    •  SERIES III - INDUSTRIAL
    •  ACCESSORIES
        CLICK  ABOVE  FOR  DETAILS



SERIES  I  RANCHER

This fully hydraulically operated Postdriver is designed to suit the Farmer or Ranch owner where small fence lines or occasional periodic fencing is required.

With "King Hitter" simplicity, uncomplicated design and simple operation this affordable entry-level unit is a must in your agriculture machinery inventory.

Features and Benefits
  • 12’ 6” Girder Construction Steel Mast. The optional mast height is calculated to allow the weight to drop at maximum gravitation speed to produce maximum kinetic energy. For long post placement,
  • Big 450 lb weight producing up to 60,000 lbs of Driving Force.
  • High Tensile ‘Live wound’ lifting cable for maximum strength and extra life.
  • Easily mounts on standard three-point linkage; optional hydraulic adjustable top link is available by request.
  • Requires just one person to operate.
  • Safety Post-cap is standard. This transfers the driving force where it counts, directly into the post.
  • The best warranty’s in the business. King Hitter is so well engineered it is Covered by the “Fairbrother double the warranty” (conditions apply)
  • Optional "Side Mount Frame kit" for Series I & II. Enables faster, quicker fence post placement by allowing the Tractor to be driven parallel to the fence lines.
Mounting 3 point linkage Cat 2
Mast Length 12'6 (3.80 m)
Hammers 450 lb
Impact 60,000 lbs (27180 kg)
Tilt Front/Back 10/20 deg.
Tilt Side/Side 20/20 deg.
Legs Fixed
Top Link Fixed
Angle Adjustment Manual
Safety Postcap Yes
Safety Guard Optional
Safety Hammer Stop Optional
Max Post Height 9 Ft.
Min. Hydraulic Pressure 1800 PSI (12340kPa)
Volume Oil/min.av 6 GPM
Storage Height:  
Shipping Weight 990lb-1100lb (450-500 kg)
Shipping Volume From 21 cu. ft (0.6 cu. m)
ITEM # DESCRIPTION WEIGHT PRICE
KH1011211E Series I Post Driver, 12'6" Beam - 3 Bank Valve Standard (but hydraulic cylinder for angle and top link not supplied). Comes with Standard Legs, Manual Angle Adjustment, 450 lb. Hammer 1,050 lbs. $5,525
*Options available for Series I Drivers: Safety Guard, Tee Post & Oil Pipe Holder & Bracket
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB FACTORY
UPDATED 10/10/08




SERIES  II  DELUXE

The King Hitter Series II Deluxe King Hitter post driver displays the patented innovative engineering skills of Fairbrother Industries.

For the serious Farmer, Rancher or agriculturalist where reasonable lines of fencing in tough terrain are required to be created or maintained. The King Hitter Series II Deluxe King Hitter is designed for tractor rear mounting on standard three-point linkage. It comes with a fully hydraulically adjustable Top-Link ram and Variable Mast side-angle adjustment.

The King Hitter Series II Deluxe King Hitter is a serious Postdriver with serious individual fencing in mind.

Features and Benefits
  • 12’ 6” 14' 16’ Girder Construction Steel Mast. The optional mast height is calculated to allow the weight to drop at maximum gravitation speed to produce maximum kinetic energy. For long post placement.
  • Big 450 lb to 600 lb weights producing up to 105,000 lbs of Driving Force.
  • High Tensile ‘Live wound’ lifting cable for maximum strength and extra life.
  • Easily mounts on standard three-point linkage.
  • Hydraulic variable adjustment top link gives 10º forward and 20º rear movement and hydraulic side angle adjustment left or right of 20º quickly allows for accurate post placing on undulating terrain.
  • Requires just one person to operate with easy and simple controls.
  • Safety Post-cap is standard. This transfers the driving force where it counts, directly into the post.
  • The best warranty’s in the business. King Hitter is so well engineered it is Covered by the “Fairbrother double the warranty” (conditions apply)
  • Optional Side Mount adaptor Frame kit for Series II. Enables faster, quicker fence post placement by allowing the Tractor to be driven parallel to the fence lines.
  • Side Shift Kit for the King Hitter Series II Deluxe King Hitter with 200mm(8”) side adjustment, allows for accurate post placing without unnecessary tractor movements.
  • Optional Hinged mast as per "Series III" can be added at time of order.
    

CONTRACTOR UPGRADE (optional)

SIDE  SHIFT  KIT
Your Series II Deluxe King Hitter mounts straight on to a series II base.

On the Series II this feature allows accurate placing of posts without unnecessary tractor movements with 8"(200mm) side adjustment.

SIDE FRAME MOUNTS FOR SERIES I AND SERIES II
Converts Series I and II to side mount, allowing tractor to be driven along fence lines.


Mounting 3 point linkage Cat 2
Mast Length 12'6 -14'-16' (3.80 - 4.25-4.88)
Hammers 450-600 lb
Impact From 75,000 lbs (33975 kg)
Tilt Front/Back **10/20 deg.
Tilt Side/Side 20/20 deg.
Legs Adjustable
Top Link Hydraulic
Angle Adjustment Hydraulic
Side Shift Optional
Safety Postcap Yes
Safety Guard Optional
Safety Hammer Stop Optional
Max Post Height 12'6" = 10'
16' = 14'
Min. Hydraulic Pressure 1800 PSI (12340 kPa)
Volume Oil/min.av 10 GPM
Storage Height:  
Hinged - 12'6" (3.81m) mast 9'10" (3.00 m)
Hinged - 14' (4.27m) mast 10'2" (3.10 m)
Hinged - 16' (4.88m) mast 10'6" (3.20 m)
Shipping Weight 1030-1200lb (467-544 kg)
Shipping Volume From 21 cu. ft (0.6 cu. m)
** Depends on tractor type  
ITEM # DESCRIPTION WEIGHT PRICE
KH1021412E Series II Deluxe - 12'6" Beam - 5 Bank Valve - Heavy Duty Strengthened Beam, Adjustable Legs, Hyd. Toplink & Angle Adjustment, 550 lb. Hammer, one spare valve section for adding options of 8" Side Shift Kit, Super Pro Base (36" side shifting), Hyd. Auger Kit or Hyd. Rock Spike 1,535 lbs. $9,425
  6 Bank Valves for Above Unit ADD $715
KH1023472E Series II Deluxe - 16' Hinged Beam - 5 Bank Valve - Heavy Duty Strengthened Beam, Adjustable Legs, Hyd. Toplink & Angle Adjustment, 550 lb. Hammer, has one spare valve section for adding options of fitting Hyd. Rock Spike, 8" Side Shift Kit, Super Pro Base (36" side shifting) or Hyd. Auger Kit. 1,738 lbs. $13,130
  6 Bank Valves for Above Unit ADD $520
KH1040003E Series II Fencetec - 16' Hinged Beam - 5 Bank Valve - Extra Heavy Tensile Beam, Hyd. Toplink & Angle Adjustment, 650 lb. Hammer, w/ two spare valve sections for adding options of Rock Spike, Combo Pilot Auger & Rock Spike Kit, or Super Pro Base (36" side shifting). 2,190 lbs. $16,510
KH1040004E Series II Fencetec - 16' Hinged Beam - 5 Bank Valve - Extra Heavy Tensile Beam, Hyd. Toplink & Angle Adjustment, 750 lb. Hammer, w/ two spare valve sections for adding options of Rock Spike, Combo Pilot Auger & Rock Spike Kit, or Super Pro Base (36" side shifting). 2,290 lbs. CALL FOR PRICE
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB FACTORY
UPDATED 10/10/08




SERIES  III  DELUXE

The Post-Driver Legend Started Here!

The Series III King Hitter Deluxe, the ‘Postdriver Legend’, is the preferred post driver for Professional Fencing Contractors, Vehicle Marker Post and Containment Post Driving, Vineyards, Orchards or wherever a serious post needs driving.

The Series III King Hitter Deluxe displays the excellence in innovative engineering that has made the King Hitter Deluxe name a legend worldwide.

This machine is for the professional Fencer, Contractor, Rancher, or Construction Company where Hydraulic suction and the Driven Post go hand in hand.

Tested in most terrain around the world with exceptional results, the Series III King Hitter Deluxe is a fully counterbalanced side-mounted machine with adjustable balance feet, connected to the standard three-point linkage. All links, side adjustment and angles are determined at the flick of the hydraulic system control lever.

Features and Benefits

  • 12’ 6”, 14’, or 16’ Girder Construction Steel Mast. The optional mast height is calculated to allow the weight to drop at maximum gravitation speed to produce maximum kinetic energy.
  • Big 450 lb, 500 lb, 550 lb and 600 lb weights can produce more than 110,000 lbs of Driving Force.
  • Australia 500lb standard, USA 550lb standard, UK 550lb standard. Extra heavy weights must be specified.
  • High Tensile ‘Live wound’ lifting cable for maximum strength and extra life.
  • Easily mounts to the right of tractor on standard three-point linkage with counter balance weights to counter side-shift adjustment. All hydraulically operated
  • Hydraulic top link has variable adjustment and gives 30º forward and 30º rear movement. The hydraulic side angle adjustment of 25º left or 45º right, quickly allows for accurate post placing on extreme undulating terrain or viticulture angle post fitting.
  • Safety Post-cap is standard. This transfers the driving force where it counts, directly into the post.
  • Requires just one person to operate with easy and simple controls.
  • The best warranty’s in the business. King Hitter Deluxe is so well engineered it is Covered by the “Fairbrother double the warranty” (conditions apply)
  • Standard Side Mounted The Series III King Hitter Deluxe enables faster, quicker fence post placement by allowing the Tractor to driven parallel to the fence lines.
  • Standard Hydraulic counterbalanced Side-Shift for The Series III King Hitter Deluxe with 450mm(18”) adjustment, allows for accurate post placing without unnecessary tractor movements.
  • Optional ‘Hinged Mast’ is ideal for storage and transportation or where overhead obstructions restrict movement to different fencing areas. (NZ only)
  • Hinged Mast Standard on all 14' and 16' Export only machines.

Mounting 3 point linkage Cat 2
Mast Length 12'6 -14'-16' (3.80 - 4.25-4.88)
Hammers 450-600 lb
Impact

100,000 lbs (45300 kg)
See brouchure
Tilt Front/Back 30/30 deg.
Tilt Side/Side 25/45 deg.
Legs Adjustable
Top Link Hydraulic
Angle Adjustment Hydraulic
Side Shift Hydraulic, up to 450mm
Safety Postcap Yes
Safety Guard Optional
Safety Hammer Stop* Optional
Min. Hydraulic Pressure 1800 PSI (12340 kPa)
See Brochure
Volume Oil/min.av 6 - 8 GPM
Storage Height: See Brouchure
Hinged - 12'6" (3.81m) mast 9'10" (3.00 m)
Hinged - 14' (4.27m) mast 10'2" (3.10 m)
Hinged - 16' (4.88m) mast 10'6" (3.20 m)
Shipping Weight 1650-1900lb (748-861 kg)
Shipping Volume From 46 cu. ft (1.3 cu. m) 
Max Post Height 12'6" = 10'
16' = 14'
*standard in Australia and North America

ITEM # DESCRIPTION WEIGHT PRICE
KH1031412E Series III Deluxe - 12'6" Beam - 5 Bank Valve - Hyd. Side Shifting (18"), Adjustable Legs, Hyd. Top Link & Angle Adjustment, 550 lb. Hammer, has one spare valve section supplied for adding options of fitting Hyd. Auger or Rock Spike 2,326 lbs. $13,130
  6 Bank Valves for Above Unit ADD $520
KH1033472E Series III Deluxe - 16' Hinged Beam - 5 Bank Valve - Hyd. Side Shifting (18"), Adjustable Legs, Hyd. Top Link & Angle Adjustment, 550 lb. Hammer, has one spare valve section for adding options of fitting Hyd. Auger or Rock Spike Kit 2,462 lbs. $14,755
  6 Bank Valves for Above Unit ADD $585
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB FACTORY
UPDATED 10/10/08




ACCESSORIES
ITEM # DESCRIPTION WEIGHT PRICE
KH1100009E Safety Guard - 1 Piece for Series I 15 lbs. $511.50
KH1100010E Safety Guard - 2 Piece fits Series II or III 20 lbs. $704
KH1102000E Series II Superpro Base - Adapts to a Series II to give side shift capability of 36" 1,560 lbs. $6,594.50
KH1104000E Beam Hinge Kit for Series II & III 38 lbs. $1,122
KH1110000E Top Link Kit for Series I & II (includes Cylinder & Hoses)   $627
KH1120000E Angle Adj Kit for Series I & II (includes Cylinder & Hoses)   $627
KH1130000E Side Shift Kit Series II (includes Cylinder & Hoses) 39 lbs. $660
KH1140002E Pilot Auger Kit - No Augers Included 88 lbs. $2,942.50
KH1140003E Combination Motor Complete (for Auger w/Hose) 70 lbs. $2,486
KH1140004E Rock Spike Combo with Auger & Combo Motor 567 lbs. $6,061
KH1140020E 2" Auger & Tip 10 lbs. $616
KH1140030E 3" Auger & Tip 11 lbs. $572
KH1140040E 4" Auger & Tip 12 lbs. $588.50
KH1140050E 5" Auger & Tip 15 lbs. $610.50
KH1140060E 6" Auger & Tip 18 lbs. $632.50
KH1140080E 8" Auger & Tip 22 lbs. $671
KH1140090E 10" Auger & Tip 29 lbs. $764.50
KH1150000E Hydraulic Rock Spike Extractor Kit (no spike included) - Must also order Rock Spike Post Cap 130 lbs. $3,575
KH1150001E Hydraulic Rock Spike Extractor Kit complete with Rock Spike Postcap (no spike included)   $4,097.50
KH1150145E 2.5" Rock Spike (65mm) - Not recommended for completely solid rock 160 lbs. $572
KH1150700E 3.5" Rock Spike (90mm) 187 lbs. $698.50
KH1150800E 5.0" Rock Spike (130mm) 352 lbs. $935
KH1160000E Hydraulic Power Pack (P.T.O. Drive & Tank) 10 gal. per minute for Series I, II, & III 66 lbs. $3,107.50
KH1170001E Tee Post/Oil Pipe Holder Bracket 5 lbs. $71.50
KH1170002E 2 7/8" Oil Pipe Holder (Fits into above Bracket) 7" Beam Only 5 lbs. $60.50
KH1170003E Tee Post Holder - 150 Beam, Series I, 6" Beam 5 lbs. $60
KH1170004E Tee Post Holder - 180 Beam, Series II, 7" Beam 5 lbs. $66
KH118000E Side Mount Frame for Series I & II 148 lbs. $1,265
KH1190001E Skid Steer Loader Quick Attach Mounting Plate, Series I & II Only 175 lbs. $984.50
KH1190002E Skid Steer Loader Quick Attach Mounting Plate, Complete kit w/Hydraulic Cylinder Top Link for Series I, 3 bank valve & Series II   $1,496
KH1190003E Skid Steer Loader Fixed Top Link for Series I & II   $209
KH1280033E Top Link Extension Bracket & Pin for Series I & II 11 lbs. $154
KH1280040E Additional Hydraulic Valve Section & Handle - Valve bank section upgrade with trade-in 1st 6 mo., each section   $462
KH1280041E Top Link Hoses & Fittings - Standard for Series I & II only 10 lbs. $88
KH1280045E Top Link - Cylinder for Series I, II, & III 22.5 lbs. $544.50
KH1280046E Skid Steer Top Link - Cylinder for Series I, 3 bank valve, & Series II 22.5 lbs. $544.50
KH1280141E Angle Adjust Hose & Fittings for Series I & Series II   $88
KH1280145E Angular Adjustment - Cylinder Series I & II 23.5 lbs. $544.50
KH1280146E Angular Adjustment - Cylinder Series III only 24 lbs. $544.50
KH1280241E Side Shift Hose & Fittings Kit for Series II only   $88
KH1280243E 18" Side Shift Hose & Fittings Kit for Series III only   $88
KH1280245E 8" Side Shift - Cylinder section with fittings for series II only 18 lbs. $544.50
KH1280246E 18" Side Shift Cylinder - Series III only (hoses & fittings needed #1280243E)   $544.50
KH1281043E Angle Adjust Hose & Fittings for Series III only   $88
KH1308001E Standard Postcap - Series I Only 30 lbs. $264
KH1308005E Standard Heavy Duty Post Cap Str beam for Series II & III 37 lbs. $379.50
KH1308006E Rock Spike Post Cap Str Beam for Series II & III (required for Hydraulic Rock Spike Kit) 85 lbs. $544.50
KH1340015E Combo Adaptor for 2"-8" Augers Complete with Clamp 10 lbs. $368.50
KH1340019E Combo Adaptor for 10" Augers Complete with Clamp 13 lbs. $390.50
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB FACTORY
UPDATED 10/10/08

  MANUFACTURER   INDEX  
  PRODUCT   INDEX  
  HOME  
  SECTIONS   -    A     B     C     D     E     F     G     H     I     J      -   SECTIONS