Fast and powerful, rugged and reliable, Shaver post drivers are the world's finest.  They're built for heavier than the job requires.  With only six moving parts, these machines perform year after year without a breakdown.

    You can choose from five models of Shaver post drivers.  All models take just a few minutes to mount or detach.  All work with any 3-point hitch, with or without Quick-Tach.  Shaver post drivers can be mounted on tractors or skid steer loaders.

EASY DRIVING

Drives posts straight and true on almost any terrain.

FAST

Drives a four to five inch post in 10-15 seconds.

POWERFUL

Drives steel, wood, or even railroad tie.

RUGGED AND RELIABLE

Only 6 moving parts ensure long machine life.

TIME SAVING

No digging,
no pointing,
no tamping,
no setting!

FIVE MODELS TO CHOOSE FROM

30,000 to 100,000 pounds of impact; front or rear mounting.

LOW COST

All these features yet affordably priced.

Self-Contained Post-Driver for Skid-Steer Loaders

Shaver Manufacturing has unveiled their newest addition to their lineup of top-quality post-drivers.  The new OH-100 is designed for operators who need a amounting and self-contained unit that is powerful, easy to maneuver and requires minimal hydraulic power. 

OH-100
Drives a 4-5 inch post in 10-15 seconds
Drives steel, wood or even railroad ties
Requires only 10-15 gpm
Has its own 5 gallon oil reservoir

The new skid-steer loader-mounted post-driver is specially designed for farmers, contractors, ranchers, landscapers and maintenance departments looking for a simple, economical and efficient solutions to installing steel or wood fence posts.  Powered by a minimum of 10 gpm, the OH-100 can drive a 4-5 inch post into the ground in less than 15 seconds and has the power to drive even railroad ties.

The OH-100 unit can easily be maneuvered around buildings, storage sheds, trees and other obstacles.  When mounting the unit to the front of a skid steer, secure the unit with the fast-tach bracket, then only two remote hydraulic hookups are required.  As the machine drives the posts, oil is pumped through the hookups from the post drivers own 5-gallon oil reservoir.

Features and Specifications	HD-8 "The Pounder"	HD-10 "The Workhorse"	HD-12H "The Brute"
Impact at Full Stroke	30,000 lbs.	71,500 lbs.	100,000 lbs.
Effective Weight of Spring Powered Hammer	360 lbs.	725 lbs.	1,100 lbs.
	Drives a 4-5" post in as little as 10-15 seconds.
Operating Distance Above Ground	53-126"	53-128"	53-128"
	Operating distance above ground is adjustable on all models.
Post Size: Maximum Width Maximum Length	Drives steel, wood posts, railroad ties.
	7 1/8" 10 feet	8 3/4" 10 feet	10 7/8" 10 feet
No. of Block Studs	4	8	8
No. of Nyrim Blocks	4	8	8
Tilt: With Hydraulic Base With Manual Base Plate	Front-back/side-side 15º/15º 15º/15º	Front-back/side-side 15º/15º 15º/15º	Front-back/side-side 20º/25º N/A
Hydraulic Base Plate and Manual Stabilizer Pad Pkg.	optional	optional	standard
Category l, ll, or lll Assembly	category l & ll	category ll & lll	category ll & lll
Mounting	front or rear or skid ldr.	front or rear or skid ldr.	rear or skid ldr.
	Whichever you choose, it takes just a few minutes to mount or detach. Works with any 3-point hitch, with or without Quick-Tach.
Hydraulic Requirements	3-4 GPM/1,500 PSI	12 GPM/1,500 PSI	15 GPM/2,000 PSI
Shipping Weight: With Hydraulic Base With Manual Base Plate	(Weights listed are approximate)
	433 lbs. 385 lbs.	661 lbs. 639 lbs.	957 lbs. N/A
	THE "POSITIONERS"
	Model SB-02	Model SB-12	Model SB-22
Width: Collapsed Extended	66" 90"	66" 90"	92" 116"
Height	37 1/2" - 55 1/2"	37 1/2"	37 1/2"
Weight	675 lbs.	650 lbs.	831 lbs.
Swivel	0º - 155º	0º - 155º	0º - 155º