Homepage W W
CHUTES and ACCESSORIES
  MANUFACTURER   INDEX  
  PRODUCT   INDEX  
  HOME  
  BACK  
  SECTIONS   -    A     B     C     D     E     F     G     H     I     J      -   SECTIONS  
Request Postal Mail Brochure  CONTACT  US 
Email Questions or Comments

THIS  DATA  DUPLICATED
FROM  THE
W W    WEB  SITE

     •  Hydraulic  Chutes
•  Palpation  Cages
•  Headgates
•  Maternity  Pens
•  Roping  Chutes
•  Portable Load  Chute
    CLICK  ABOVE  FOR  DETAILS
     •  Beefmaster  Chutes
•  Longhorn  Chutes
•  Yoke  Trailers
•  Calf  Cradle
•  Bucking  Chutes
    CLICK  ABOVE  FOR  DETAILS
All chutes feature dual dropbars on both sides with maintenance-free gravity latches.
Steel floors and removable hinged kick panels are standard features on all chutes.
All chutes feature both front and side exits, and optional towing packages
are available on all chutes for full portability.
The hydraulic chutes offer various designs to satisfy any producer.




HYDRAULIC   CHUTES
Overall Length - 101"
Width - 83"
Overall Height - 96"
Dropbars - 28"

Nylon bushings on bottom of headgate and tailgate.

Bottom of sides adjust manually.

Center bar is 1 1/2" solid steel shaft with sealed bearings.

Emergency side exit.
ITEM # DESCRIPTION WEIGHT PRICE
Cattleman Hydraulic Chutes
WW4-110-1 L.H. 1 1/2" Top shaft with bearings, lower gate sides adjust manually, nylon bearings on bottom of headgate and tailgate, emergency side exit, Length 101"-Width 83"-Height 96"-Dropbars 28" 2,900 lbs. $13,155
WW4-110-2 R.H. 1 1/2" Top shaft with bearings, lower gate sides adjust manually, nylon bearings on bottom of headgate and tailgate, emergency side exit, Length 101"-Width 83"-Height 96"-Dropbars 28" 2,900 lbs. $13,155
Ranchmaster Hydraulic Chutes
WW4-120-1 L.H. 2" Top shaft with bearings, hydraulic bottom, nylon bearings on bottom of headgate and tailgate, emergency side exit, Length 101"-Width 83"-Height 96"-Dropbars 28" 3,250 lbs. $14,182
WW4-120-2 R.H. 2" Top shaft with bearings, hydraulic bottom, nylon bearings on bottom of headgate and tailgate, emergency side exit, Length 101"-Width 83"-Height 96"-Dropbars 28" 3,250 lbs. $14,182
Super Pro Series Hydraulic Chutes
WW4-130-1D L.H. 2" Top shaft with bearings, hydraulic boom, sealed bearing on bottom on headgate and tailgate, wear plates on headgate, headgate ext., emergency side ext., dual cyl. on bottom of gates, Length 101"-Width 83"-Height 96"-Dropbars 25" 4,450 lbs. $17,261
WW4-130-2 R.H. 2" Top shaft with bearings, hydraulic boom, sealed bearing on bottom on headgate and tailgate, wear plates on headgate, headgate ext., emergency side ext., dual cyl. on bottom of gates, Length 101"-Width 83"-Height 96"-Dropbars 25" 4,450 lbs. $17,261
WW4-150-1 Bull Master Hydraulic Chute L/H lbs. $19,061
WW4-150-2 Bull Master Hydraulic Chute R/H lbs. $19,061
  Custom lengths and heights per inch (CAT/RM)   $94
  Custom lengths and heights Pro Series   $106
OPTIONS FOR HYDRAULIC CHUTES
9330-021-000 Palpation Door $473
9330-009-000 Palpation Cage HD $1,423
9330-009-100 Palpation Cage w/ACF 38-1/2 $1,641
9330-011-000 Single Let Down Bars (each) $54
9330-010-000 Split Drop Door (removeable) $631
9316-000-000 Added Length-Height (per inch) "Cattleman/Ranchmaster" $94
9317-000-000 Added Length-Height (per inch) "Super Pro" $106
0000-000-000 Bullmaster Kit - 8" taller, 16" longer, 6" wider $2,820
9330-012-000 Hydraulic Adjust Bottom $1,270
9330-013-000 Split Individual-Bottom Adjust $1,490
9313-000-001 Super Pro Conversion - Headgate/Tailgate Bottom Cyl. Adjust $1,653
9330-001-000 Standard Tip Chute Assembly $5,513
9330-003-000 Head Rest $236
9330-014-000 Implant Bars (weld on) $296
9330-015-000 Implant Bars (bolt on) $473
9330-016-000 Gate Guards $1,573
9330-016-001 Gate Guard Frames $618
9330-017-000 Dual Controls $1,104
9330-005-000 Hydraulic Head Bender $1,247
9330-007-000 Hydraulic Neck Bar w/ Nose Bar $1,452
9330-005-000 Seperate Unit $324
9330-018-000 Gas Powered Separate Unit $5,249
9341-000-000 Yoke Trailer-8 bolt, 16" wheels $3,141
9330-002-000 2-Piece Fall Out Floor $838
9330-002-001 3-Piece fall Out Floor $1,093
9330-023-000 Hydraulic Leg Puller $1,646
9330-008-101 Louvers for Hydraulic Chute Sides (each) $54
9330-020-000 3/4 inch Hot Roll Floor-1/2 inch spacing $644
9330-022-000 Full Door on Right $161
0000-000-000 Single Weigh Scale With 600 Indicator (not computer Comp) $4,136
0000-000-000 Memory Weigh Scale w/550 Indicator (Computer Comp) $5,101
  Scales are both AC & DC Compatible  
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB FACTORY
UPDATED 1/23/14




PALPATION   CAGES             
Height - 78 1/2"
Width - 38 1/2"
   (offset sockets add 8 1/2")
Length - 34 1/16"

Framework of W-W Palpation Cages are fabricated from 1 1/2 standard pipe with all joints saddle cut for extra strength. Cage gates mount 60" high in frame and are fabricated from 2" 14-gauge high tensile steel tubing with 50,000 PSI yield strength. Gates mount on frame with 2" standard pipe hinges and retaining collars and come equipped with spring loaded plunger latches and special formed steel strike plates. Gates are designed for positive locking in both cross alley and closed positions.
ITEM # DESCRIPTION WEIGHT PRICE
WW2-568 Palpation Cage - Left 240 lbs. $857
WW2-662 Palpation Cage - Right - (hinged reverse of #568 for RH systems) 240 lbs. $856
WW2-661 Palpation Cage w/reverse swing (both gates hinged from rear) 240 lbs. $856
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB FACTORY
UPDATED 1/23/14




HEADGATES


BEEFMASTER SELF-CATCH
HEADGATE


Includes protective weather hood for prolonged life of headgate.

Most user friendly headgate on the market.

Opens fully in each direction and adjustable front opening.

Optional nose bar or neck bar.

Quoted by seasoned vets as being the best self-catch headgate on the market !



SCISSOR HEADGATE

Scissor headgate is an economical alternative.

It has multi-stop dog and ratchet action for quick, safe stops.

Bolts onto any W-W Beefmaster squeeze chute body.

Also available:
Cowboy headgate, and Stanchion headgate (not shown).
See Beaver Valley Supply for details.

ITEM # DESCRIPTION WEIGHT PRICE
WW2-519-1 Beefmaster Self-Catch Headgate/Left 310 lbs. $1,544
WW2-519-2 Beefmaster Self-Catch Headgate/Right 310 lbs. $1,544
WW2-121 Beefmaster Nose Bar & Pin 8 lbs. $59
WW2-118-1 Beefmaster Neck Bar/Left 10 lbs. $67
WW2-118-2 Beefmaster Neck Bar/Right 10 lbs. $67
WW2-600-1 Scissor Headgate w/ Head Chain/Left 170 lbs. $901
WW2-600-2 Scissor Headgate w/ Head Chain/Right 170 lbs. $901
WW2-505 Cowboy Headgate 170 lbs. $1,005
WW2-716 Stanchion Headgate (maternity-pen) 85 lbs. $412
WW2322-031-000 Split Scissor Tailgate LH lbs. $901
WW2322-032-000 Split Scissor Tailgate RH lbs. $901
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB FACTORY
UPDATED 1/23/14




MATERNITY   PENS

Designed for maximum operator safety, the W-W Maternity Pen allows for effective control of the cow. The "split" gate facilitates many functions including calving, nursing, or the occasional caesarian.

Now the vet won't bulk at pulling a calf when you have a W-W Maternity Pen instead of a sturdy ole' post and lariat.
ITEM # DESCRIPTION WEIGHT PRICE
WW2-718 10' x 10' Maternity Pen with Stanchion Headgate-Complete with headgate and front and rear walk gates/Center swing gate is split to allow nursing and C-sections 800 lbs. $2,873
WW2-505 Cowboy selfcatch headgate 170 lbs. $1,005
WW2-716 Maternity Pen Stanchion Headgate 85 lbs. $412
WW2-771 Trim Stock Post Package-Add this package plus a stanchion headgate to the EZ-DUZ-IT to make a Trim Stock or a Maternity Pen 75 lbs. $219
WW2-317 Portable Yoke Trailer less tires (fits any W-W chute) 350 lbs. $1,604
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB FACTORY
UPDATED 1/23/14




ROPING   CHUTES

Regarded by professionals as one of the best in the industry, our W-W Steer Roping Chute can withstand the test of time. It features a spring loaded front gate and side access doors that allow horn wrapping. A breakover latch prevents front gate backswing and can be operated from the overhead operator's seat or while standing on either right or left side of the chute. The slideout tailgate, based on input from professional ropers, compliments the popular W-W Roping Chute.

The chute framework is constructed of 1 1/2" x 14 gauge round tubing with 14 gauge sheet metal covering the lower half of the sides and front. The overall dimensions are 89" long x 34" wide x 60" tall with tapered sides to reduce the lower width to 17 1/2". The release mechanism is a hand operated, spring loaded, tie-rod pivot assembly that automatically locks in the open position to prevent backswing of the front exit gates once the animal is released.

The W-W Roping Chute Extension pins directly to the rear of the chute and includes the same slideout tailgate as featured on the roping chute. The W-W arrow pens allow for one man to operate the pens, without hotshots or prods, while presorting the stock for entry into the roping chute.
ITEM # DESCRIPTION WEIGHT PRICE
WW2-552 Roping Chute (97-1/2" long x 66" High x 30-1/2" Wide at top) with tailgate (Width tapers to 12" at bottom-Lower 32" is solid sheet metal) 595 lbs. $2,498
5310-000-100 Fully Remote Pneumatic Rope Chute (air operated, also need electricity), tailgate opens & closes remotely w/ prgrammable delay set at 7- seconds   $4,827
5310-000-050 Mini Roping Chute   $1,795
WW2-555 Roping Chute Extension (110" long x 66" High x 30-1/2" Wide) with tailgate (Width tapers to 12" at bottom-Lower 32" is solid sheet metal) 488 lbs. $1,504
Chute features spring loaded front gate and side access doors. Breakover latch prevents front gate back swing and can be operated from overhead operator's seat or while standing on either right or left side of chute. Same specs. Apply to Electric and Air models.
HORSE SAVER
5310-105-000 Rope Chute Extension w/Push Door lbs. $1,899
5311-000-000 HS-50 Horse Saver 260 lbs. $1,602
5311-001-000 HS-53 Horse Saver Wheel Kit 50 lbs. $373
5312-000-000 Horse Saver Arena Complete w/Horse Saver lbs. $5,391
"ARROW" PENS
WW2-960 12 Gate "Arrow" Pen (inside load)   $9,717
WW2-970 14 Gate "Arrow" Pen (inside load)   $9,790
WW2-969 14 Gate "Arrow" Pen (outside load)   $10,917
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB FACTORY
UPDATED 1/23/14




PORTABLE LOAD CHUTE
The New WW Portable Load Chute loads ground level, 24", 36" and 48". Load chute total length is 14'. With the load ramp being 12 ft. long. Panels on the side of load chute is sheeted 36" high with a non skid Rubber floor and steel cleats every 18" to insure solid footing. The WW Load Chute also comes complete with a swing-out tongue.
ITEM # DESCRIPTION WEIGHT PRICE
WW2344-000-000 WW Portable Load Chute w/Wheel & New Tires lbs. $5,818
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB FACTORY
UPDATED 1/23/14




BEEFMASTER   CHUTES

  • W-W Beefmaster Chutes are available in Standard and XL lengths.
  • All chutes have steel floors and steel side panels.
  • Self-Catch headgates come with protective weather hood for prolonged life of headgate.
  • Dual Dropbars are equipped with a foolproof gravity latch.
  • A hinged drop board allows for milking, trimming hooves, and collection of semen.
  • Optional nose or neck bars provide maximum control when dehorning and tagging.
  • XL Chutes are available with optional vet gate.
  • Optional chute / scale combination.
  • Portable wheel attachments are available for all Beefmaster chutes.
BEEFMASTER - STANDARD

Height - 74"
Width - 41"
Length - 91"
Headgate Closed - width adjusts from 5" to 10"
Headgate Open - width adjusts from 5" to 30"
Headgate Opening Height - 67"
Squeeze Adjustment
    Floor Level - width adjusts from 6" to 21"
    Gate Top Level - width adjusts from 21" to 37"
Opening in Sidegate - with One Drop Bar Disengaged 22" x 25"



BEEFMASTER XL - 2VG

Rear Entry Gates on Each Side at Rear - 21" x 70" opening
Height - 74"
Width - 41"
Length - 114"
Headgate Closed - width adjusts from 5" to 10"
Headgate Open - width adjusts from 5" to 30"
Headgate Opening Height - 67"
Squeeze Adjustment -
    Floor Level - width adjusts from 6" to 21"
    Gate Top Level - width adjusts from 21" to 37"
Opening In Sidegate - with One Drop Bar Disengaged 22" x 25"

ITEM # DESCRIPTION WEIGHT PRICE
BEEFMASTER STANDARD SQUEEZE CHUTES/WITH SELF CATCH HEADGATE
WW2-524-1 Beefmaster/Left w/ Self Catch Headgate & Pull Up Tailgate 1,265 lbs. $4,579
WW2-524-2 Beefmaster/Right w/Self Catch Headgate & Pull Up Tailgate 1,265 lbs. $4,579
WW2311-111-100 Beefmaster/Left w/Self Catch Headgate & Split Tailgate 1,265 lbs. $5,233
WW2-524-2 Beefmaster/Right w/Self Catch Headgate & Split Tailgate 1,265 lbs. $5,233
7'6 1/2" long - 41" wide - 6'2 1/2" tall
BEEFMASTER XL SQUEEZE CHUTES/WITH SELF CATCH HEADGATE
WW2311-311-100 Beefmaster Extra Long Chute w/Vet Gate/Left, w/Split Tailgate 1,390 lbs. $5,916
WW2311-312-100 Beefmaster Extra Long Chute w/Vet Gate/Right, w/Split Tailgate 1,390 lbs. $5,916
WW2311-211-100 Beefmaster Extra Long Chute-Straight/Left, w/Split Tailgate 1,340 lbs. $6,086
WW2311-212-100 Beefmaster Extra Long Chute-Straight/Right, w/Split Tailgate 1,340 lbs. $6,086
9'6" long - 41" wide - 6'2 1/2" tall
Loading Chutes
WW2343-000-000 Portable Loading Chute   $5,759
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB FACTORY
UPDATED 1/23/14




LONGHORN   CHUTES
  • The longhorn is in a class of its own--a unique, proud animal that demands its own working chute.
  • With six exit options and a dozen width adjustments, the W-W Longhorn chute, with its spring-loaded slam latches, is efficiency at its best.
  • This sturdy unit, with W-W's unique system of self-contained interlocking drop pins, can be easily assembled and dismantled in minutes for relocation.
  • Includes scissor headgate
  • Rear entrances/exits are 48" wide.
  • Length from headchute to rear gate is 12'.


  
ITEM # DESCRIPTION WEIGHT PRICE
WW2-598 10' Longhorn Chute 1,155lbs. $4,203
Newly designed chute for longhorns - Now includes scissor headgate. Six exit options and a dozen width adjustments.
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB FACTORY
UPDATED 1/23/14




YOKE   TRAILERS



( under construction )
ITEM # DESCRIPTION WEIGHT PRICE
WW2-317 Portable Yoke Trailer with tires (fits any W-W chute) 350 lbs. $1,604
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB FACTORY
UPDATED 1/23/14




CALF   CRADLE

The WW-Paul/Teco Calf Table is designed to work calves up to 600 lbs. It comes with a head catch and a side squeeze bar designed for holding the animal in place. The table is well balanced allowing easy tilt over. The ratchet driven dally rope on the rear gate draws the rear legs back, thus giving greater access for working the calf. Please Specify Right or Left Brand Side when ordering. Quick, efficient easy to use and very little maintenance expense are built right into this rugged, welded pipe and sheet steel Calf Table. Available for right or left branding. Low compact design assures easy transport and handling.

Recommended for calves up to 600 lbs.
ITEM # DESCRIPTION WEIGHT PRICE
WWTCT600LH WW-Paul/Teco Calf Table 720 lbs. $2,535
WWTCT600RH WW-Paul/Teco Calf Table 720 lbs. $2,535
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB FACTORY
UPDATED 1/23/14




BUCKING   CHUTES


Our rugged Bucking Chutes are the guarantee of a successful rodeo, while ensuring safety for rider and animal.

W-W is chosen by professionals at nationally renowned events such as the National Finals Rodeo in Las Vegas and at the Pro Rodeo Hall of Fame.



The framework is constructed of 2" Schedule 40 pipe and the gates and backpanel are constructed from 2 1/4" x 13 gauge and 1.315 x 13 gauge round tubing with 14 gauge sheet metal covering on lower 2' of gate and four interior spaces. The catwalk is constructed from 2" x 13 gauge tubing and 3/4" exterior plywood. Each chute is equipped with a rolling door that is operated from the catwalk position. The front gate swings a full 180 degrees when opened to prevent injury to both contestants and animals. Dimensions are 100" long x 33" wide x 72" tall with a 4' catwalk on the back of the chute mounted 3' above the ground.

90 Degree Corner Panel available, pictured left
ITEM # DESCRIPTION WEIGHT PRICE
WW3-102-1 #1 Bucking Chute - left hand 1,418 lbs. $5,463
WW5331-100-100 #1 Bucking Chute Left-Manual Adjust lbs. $6,274
WW5331-100-200 #1 Bucking Chute Left-Hydraulic Adjust lbs. $6,988
WW3-103-1 Add-On Bucking Chute - left hand 1,033 lbs. $3,867
WW5332-100-100 Add on Bucking Chute Left Hand-Manual Adjust lbs. $4,682
WW5332-100-200 Add on Bucking Chute Left Hand-Hydraulic Adjust lbs. $5,396
WW3-102-2 #1 Bucking Chute - right hand 1,418 lbs. $5,463
WW5331-200-100 #1 Bucking Chute Right Hand-Manual Adjust lbs. $6,274
WW5331-200-200 #1 Bucking Chute Right Hand-Hydraulic Adjust lbs. $6,988
WW3-103-2 Add-On Bucking Chute - right hand 1,033 lbs. $3,867
WW5332-200-100 Add on Bucking Chute Right Hand-Manual Adjust lbs. $4,682
WW5332-200-200 Add on Bucking Chute Right Hand-Hydraulic Adjust lbs. $5,396
Bucking Chute Accessories
WW5330-002-000 Bucking Chute Safety Cover lbs. $404
WW5343-510-000 10' BP Rigging Panel lbs. $588
PRICE DOES NOT INCLUDE SETUP OR SHIPPING - PRICED FOB FACTORY
UPDATED 1/23/14

  MANUFACTURER   INDEX  
  PRODUCT   INDEX  
  HOME  
  SECTIONS   -    A     B     C     D     E     F     G     H     I     J      -   SECTIONS